Crump Posted April 11, 2010 Report Share Posted April 11, 2010 Ok so Ill be running a RF P-200-2 on my tweeters, and 4 channel doesnt have a passthrough for the RCA's, can I just use the Sub amps Pass through? Also will turning the sub off on the deck turn off the tweeters I will be connecting to the P-200-2 if I use the sub amp's RCA Pass throughs? Team gg Team doa Installs I have doneMy 2010 Rebuild 144 db so far....2 DC xl 10s Firing into cabin on a RF 25002 12" AQ HD's powered by a Saz 2k + Lots o Mids+Highs Link to comment Share on other sites More sharing options...
Sanitarium Posted April 11, 2010 Report Share Posted April 11, 2010 Ok so Ill be running a RF P-200-2 on my tweeters, and 4 channel doesnt have a passthrough for the RCA's, can I just use the Sub amps Pass through? Also will turning the sub off on the deck turn off the tweeters I will be connecting to the P-200-2 if I use the sub amp's RCA Pass throughs? you'll be better off just using rca splitters. Link to comment Share on other sites More sharing options...
lem43606 Posted April 11, 2010 Report Share Posted April 11, 2010 yes go with the slpitter instead 2 Fi BTL N2 18s Fully LoadedSundown Audio NS-1Kenwood 845 HU Clarion EQ4 Juicebox 3100sKnu Wire"Big 3"Mechman 270a156.3dBTeam GG. Link to comment Share on other sites More sharing options...
Crump Posted April 11, 2010 Author Report Share Posted April 11, 2010 yes go with the slpitter instead so which ones should I split either the front or the rears? which or does it not matter and will I lose anything by splitting it? Team gg Team doa Installs I have doneMy 2010 Rebuild 144 db so far....2 DC xl 10s Firing into cabin on a RF 25002 12" AQ HD's powered by a Saz 2k + Lots o Mids+Highs Link to comment Share on other sites More sharing options...
Neo_frog Posted April 11, 2010 Report Share Posted April 11, 2010 I'm assuming you only have front and rear preouts. Split the rears. And you will not notice any difference in the response of either. Need an install? Hit me up.[email protected]Got car audio questions? Check here first!Everything you need to know. =]http://www.stevemeadedesigns.com/board/topic/83029-everything-you-need-to-know/ Link to comment Share on other sites More sharing options...
Crump Posted April 11, 2010 Author Report Share Posted April 11, 2010 I'm assuming you only have front and rear preouts. Split the rears. And you will not notice any difference in the response of either. Cool, thanks, and no I have front, rear and sub, my 4 channel has no outputs for the RCA's but the sub amp does, but Ill just split the rears and run the amp that way Team gg Team doa Installs I have doneMy 2010 Rebuild 144 db so far....2 DC xl 10s Firing into cabin on a RF 25002 12" AQ HD's powered by a Saz 2k + Lots o Mids+Highs Link to comment Share on other sites More sharing options...
Neo_frog Posted April 11, 2010 Report Share Posted April 11, 2010 Cool, thanks, and no I have front, rear and sub, my 4 channel has no outputs for the RCA's but the sub amp does, but Ill just split the rears and run the amp that way Agghh post fail. Split the fronts since you're running tweeters. So you're adding a third amp then? I didn't read the first post carefully sorry. Need an install? Hit me up.[email protected]Got car audio questions? Check here first!Everything you need to know. =]http://www.stevemeadedesigns.com/board/topic/83029-everything-you-need-to-know/ Link to comment Share on other sites More sharing options...
LilTeddyP Posted April 11, 2010 Report Share Posted April 11, 2010 Yes what frog said, just use splitter off the front RCAs and yes frog, he will be running the tweets off a p200 2001 Bravada (2wd) Pewter on 24's JVC KW-AV60BT 10 Alpine Type-S 6.5s 2 PSI/BTL 18's @ 32Hz 2 Rockford Fosgate T25001-bd's @ 1-ohm each Rockford Fosgate T1000-4 Rockford Fosgate T400-4 Rockford 3Sixty.2 Yellow top up front, 2 9a31s in the back LOTS of AT 1/0 Python 991 350 Amp Singer Alt "Build Log" My Facebook My YouTube i didnt see the video or read anything but...cool story and the reason your being a cock tonight is? Link to comment Share on other sites More sharing options...
Crump Posted April 11, 2010 Author Report Share Posted April 11, 2010 Agghh post fail. Split the fronts since you're running tweeters. So you're adding a third amp then? I didn't read the first post carefully sorry. So do I want these? My link or these My link and how many do I need? Team gg Team doa Installs I have doneMy 2010 Rebuild 144 db so far....2 DC xl 10s Firing into cabin on a RF 25002 12" AQ HD's powered by a Saz 2k + Lots o Mids+Highs Link to comment Share on other sites More sharing options...
Neo_frog Posted April 11, 2010 Report Share Posted April 11, 2010 Your going to be splitting two male ends into four male ends so you'll need 2x one female to two male. Need an install? Hit me up.[email protected]Got car audio questions? Check here first!Everything you need to know. =]http://www.stevemeadedesigns.com/board/topic/83029-everything-you-need-to-know/ Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.