hondaonchrome Posted April 17, 2010 Report Share Posted April 17, 2010 good luck..... Quote Link to comment Share on other sites More sharing options...
huh?do-what? Posted April 17, 2010 Report Share Posted April 17, 2010 why hasn't anyone suggested to check the car's fusebox for a blown fuse? Quote God damn its hot today. My balls are stuck to my leg. Link to comment Share on other sites More sharing options...
Bills Posted April 17, 2010 Report Share Posted April 17, 2010 At work, I'll have cars come in with other aftermarket decks or factory decks that don't power up any more, they buy a new deck and pay for install. for fun i check all fuses, 9 times out of 10 its a blow fuse, but i still install the new radio because that's what I'm paid to do Bills Quote KwB Team DC Audio Midwest captain Link to comment Share on other sites More sharing options...
Kjbulldog Posted April 20, 2010 Report Share Posted April 20, 2010 On mine the red wire is like supposed to run to the harness the key is connected to, like a remote wire so it comes on when I turn the key on. Mine wouldn't come on either til I hooked it up. But instead of messing with the ignition harness I just ran it to a fuse in the fuse box that gets power when the key is on Quote Link to comment Share on other sites More sharing options...
blackrosetiger Posted April 20, 2010 Report Share Posted April 20, 2010 On mine the red wire is like supposed to run to the harness the key is connected to, like a remote wire so it comes on when I turn the key on. Mine wouldn't come on either til I hooked it up. But instead of messing with the ignition harness I just ran it to a fuse in the fuse box that gets power when the key is on And you don't blow fuses left and right? I'm surprised if you dont. (BTW thats a real good way to screw up your computer) Quote 1998 Plymouth Voyager (daily) Jensen VM9213 H.U. (I Know but I havent had any problems.... yet) 5.25" Factory -> Sound Stream SST5.2 6x9 Hifonics ZXi 693 -> Sound Stream SST6.9 Amp: Class D: Crescendo 3KWP (x2) Class A/B: Crescendo 1000C4 Sub: Almani S-7 10" (x6) Link to comment Share on other sites More sharing options...
BulletInjection Posted April 20, 2010 Report Share Posted April 20, 2010 With one I did I just used 18awg and crimped two quick connect fittings and did a 10amp fuse Quote My build: http://www.stevemeadedesigns.com/board/ind...8920&st=100 http://www.youtube.com/Bulletinjection Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.