freestylin Posted July 3, 2007 Author Report Share Posted July 3, 2007 okay thanks for the suggestions guys will try to get most of it done tomorrow Link to comment Share on other sites More sharing options...
Ernesto Posted July 3, 2007 Report Share Posted July 3, 2007 As for the gap...If you can't bring it together...I would fiberglass it...Since this is your first box then lets stay away from that and I would get some Liquid nails, liquid nail the gap, and give it some silicone if you want to make sure there is no little gaps. Link to comment Share on other sites More sharing options...
freestylin Posted July 3, 2007 Author Report Share Posted July 3, 2007 so caulk it and than silicone it i will keep that in mind when i put the top piece on Link to comment Share on other sites More sharing options...
FieroGrande Posted July 3, 2007 Report Share Posted July 3, 2007 Sanding it and then adding glass will be ok! if its not going to be seen you can carpet it after your done! But just make sure that the inside is sealed up good and u dont have to worry too much about the outside! Link to comment Share on other sites More sharing options...
Forevrbumpn Posted July 3, 2007 Report Share Posted July 3, 2007 would a circle jig work for this because the l7 is more of a square than a circle but i will probably end up using the jigsaw.Dohhh... forgot they were kicker squares, my bad I have a ritual called "terminator". I crouch in the shower in the "naked terminator" pose. With eyes closed I crouch for a minute and visualize either Arnie or the guy from the 2nd movie. I then start to hum the T2 theme. Slowly I rise to a standing position and open my eyes. It helps me get through my day. The only problem is if the shower curtain sticks to my terminator leg. It sorta ruins the fantasy. Link to comment Share on other sites More sharing options...
freestylin Posted July 3, 2007 Author Report Share Posted July 3, 2007 its coming a long koo got to do some repair with wood putting though some cracks but for the most part its looking koo i will have some pictures of it later on today Link to comment Share on other sites More sharing options...
freestylin Posted July 4, 2007 Author Report Share Posted July 4, 2007 Here some updates: Link to comment Share on other sites More sharing options...
freestylin Posted July 4, 2007 Author Report Share Posted July 4, 2007 Link to comment Share on other sites More sharing options...
freestylin Posted July 4, 2007 Author Report Share Posted July 4, 2007 Link to comment Share on other sites More sharing options...
freestylin Posted July 4, 2007 Author Report Share Posted July 4, 2007 well let me know what you guys think and anything else i need to do or even critize and let me whats wrong Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.