JZeFF Posted May 20, 2010 Report Posted May 20, 2010 How can i test to see if my remote wire is putting out a signal using a multimeter? I got a new/used radio and the equalizer thats hooked up to the remote wire, the blue lights on it work occasionally.. And i don't have any amps hooked up yet to test to see if its the remote wire, or the LED lights in the EQ that are not working... Thanks.. And yes, i know... i ask alot of questions... lol Pioneer x930 bt Rockford t2500 bdcp 18" nightshade v1 DC audio 175.4 RF power T162s up front, infinity 3 way 6x9's in the back (removing rear stage and re-doing doors soon) 3x XS power D2700's Knukonceptz 0awg all around
devil4u2c Posted May 20, 2010 Report Posted May 20, 2010 just a test lignt, ground out the lead and put the test light on the wire, of it comes on then you got juice.
bassl0va Posted May 21, 2010 Report Posted May 21, 2010 you could set your DMM to volts DC (20v range) ground the negative lead, put the positive on the remote wire, hey presto! My RE MT 18" wall build Former build, farewell beloved wall.In progress, Toyota Starlet build This forum has a massive boner for ridiculous electrical upgrades.
HHR Ed Posted May 21, 2010 Report Posted May 21, 2010 Remote wire doesnt put out signal. It will put out 12v DC when powered. Just use a multi meter and see if it goes to 12v Ed Lester ShowtimeSPL Host Showtime Electronics Video MarketingMy old Build Loghttp://www.stevemead...08/#entry511451http://www.youtube.com/showtimespl 5 time dB Drag Finalist Last ride 2007 HHR, current dB 153.5 and bass race 149.4 dB. 153.0 dB on music New Ride, 2008 HHR SS. Build under way. Loudest score ever = 171dB 2009 dB Drag Racing, North American Points Champion
Recommended Posts
Archived
This topic is now archived and is closed to further replies.