TLEJ Posted August 7, 2010 Report Posted August 7, 2010 (edited) Everything works fine when the car is on battery, but when I go to crank my car my subs pop(?) then just have a real low hum to them, until I cut the car back to battery. If I cut the whole car off, they POP right when the amps cut off. I don't really know where to begin on how to fix this.. And I read somewhere that my RCA's should be ran on the opposite side of my power wires? EDIT: (Some more info) I had a battery charger hooked up to my battery, and that caused it to hum when the car was off, but the electrical was on. Edited August 7, 2010 by TLEJ Quote
UnderLoK Posted August 7, 2010 Report Posted August 7, 2010 (edited) You need to remove the RCA's, power it on and see if the hum still exists. If it does it's your ground, if it doesn't it's your RCAs. The pop could be related, but it could also be from your remote turning on your amps too soon or not enough power or... You might need to go with a relay. Edited August 7, 2010 by UnderLoK Quote If at first you do not succeed, you are doing it wrong! -ARSCheck out my walled TBSS build over here4 Fi Team 18s on 2 Cactus K9 DS18 doors on 2 MBQ 1Ks, Vifa pillars on a STL4.500 Pioneer X8500 6 XS Power D7500, 1 3400S Second Skin 2 270a Mechman Alts
55437Audio Posted August 7, 2010 Report Posted August 7, 2010 Your sub sonic filter possibly is set to high on your amp. Or RCA from deck is bad Quote My First Build on SMD (Blow Through) 2004 Ford F-350 SD Lariat Pioneer 3200BT DVD Deck Infinity Reference Components not powered Bully Dog Gauge Cluster Pyro, Turbo, Trans SF3 SCT Tuner W/Customs If you can't Join em' Crush em'
TLEJ Posted August 7, 2010 Author Report Posted August 7, 2010 (edited) Ah! Genious UnderLoK. I removed the RCA's from the amps, and there was no pop coming on, no hum, no pop going off. So now what..? EDIT: Possibly the RCA's came loose from the HU? Edited August 7, 2010 by TLEJ Quote
55437Audio Posted August 7, 2010 Report Posted August 7, 2010 Does it pop when you go from 0 to 1 back to 0 volume? Quote My First Build on SMD (Blow Through) 2004 Ford F-350 SD Lariat Pioneer 3200BT DVD Deck Infinity Reference Components not powered Bully Dog Gauge Cluster Pyro, Turbo, Trans SF3 SCT Tuner W/Customs If you can't Join em' Crush em'
Guest Posted August 7, 2010 Report Posted August 7, 2010 what is your ground bolted to? it should be bolted to a large thick piece of metal (preferably frame, and not a seat bolt) and have all paint sanded around where the lug would bolt to. Quote
TLEJ Posted August 7, 2010 Author Report Posted August 7, 2010 I am using a preferably cheap HU in this install, and forums say that is regularly pops when changing volumes. (0-1), (1-2), and so on. My ground for the amps are in the same spot, bolted TIGHT to the chassis of the vehicle. The paint was sanded from the bolt, screw, and terminals. Quote
55437Audio Posted August 7, 2010 Report Posted August 7, 2010 Kranny has a point but this happened to me before and my subsonic filter was a lil high(the him noise) and my RCA coming from the deck was broken so I needed a new deck. I tried a relay on my remote wire and it did not work. And I also true grounding in multiple places, but always popped I came to the conclusion the deck was f***** Quote My First Build on SMD (Blow Through) 2004 Ford F-350 SD Lariat Pioneer 3200BT DVD Deck Infinity Reference Components not powered Bully Dog Gauge Cluster Pyro, Turbo, Trans SF3 SCT Tuner W/Customs If you can't Join em' Crush em'
TLEJ Posted August 7, 2010 Author Report Posted August 7, 2010 It probably is the head unit... http://www.amazon.com/Salamander-SSI-S-6000-Dash-Stereo/dp/B002PNVX2Y/ref=cm_cr_pr_product_top/188-5920731-4696003 Quote
Guest Posted August 7, 2010 Report Posted August 7, 2010 Kranny has a point but this happened to me before and my subsonic filter was a lil high(the him noise) and my RCA coming from the deck was broken so I needed a new deck. I tried a relay on my remote wire and it did not work. And I also true grounding in multiple places, but always popped I came to the conclusion the deck was f***** exactly what im thinking now after he said his ground was strong. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.