mhart Posted August 7, 2010 Report Share Posted August 7, 2010 2000 civic si, just got it done. 2 18" XL and a RF T4000 at 2 ohm. Quote '00 Honda Civic Si IASCA stock trunk/pickup 1 World Record 4/20 150.6/150.7dBTeam DC Team XS Power Team ISB Steve's Body Shophttp://www.dcsoundlab.com/ Link to comment Share on other sites More sharing options...
wL<3bass Posted August 7, 2010 Report Share Posted August 7, 2010 My buddy is gonna do a new system in his 97 civic, I think hes going with two 12" DC Lvl4XL on a T4k sealed off port through the rear deck. Quote Vehicle: 1997 S10 Blazer 4dr 4X4 Exterior: Rear End Bagged, Black Grill, Lifted 2" Amplifiers: Rockford Fosgate T8004 & T10001bd Batteries: 2 Stinger SPV35, Kinetik HC2400 Electrical: Big 3, DC Power 290amp Alternator w/ MLA at 15.5v Enclosure: 4.2 ft³ @ 33Hz 84sq.in. of port (20sq.in. per cube) Headunit: Eclipse CD3200 w/ 80G iPod Mids/Highs: Rockford T152s (a-pillars), Rockford T162s (doors) Subwoofers: 1 15" Fi BL Fully Loaded Wire: All 1/0g Kicker Hyperflex My YouTube Videos My Fiberglass A-Pillar Build My "Seamless" Looking Box Build My DD1508 T-Line Bandpass Build "Seamless" w/ Acrylic Windows (for '05 TrailBlazer) My Stealth 8" Fiberglass Build (for '05 TrailBlazer) My Build For A Friend's '08 Cobalt 15" BL Sealed Off From The Trunk My feedback/references... Link to comment Share on other sites More sharing options...
mhart Posted August 7, 2010 Report Share Posted August 7, 2010 My buddy is gonna do a new system in his 97 civic, I think hes going with two 12" DC Lvl4XL on a T4k sealed off port through the rear deck. i had port and subs forward sealed in the trunk, same set-up, tuned low and it hammered, then i built this. Quote '00 Honda Civic Si IASCA stock trunk/pickup 1 World Record 4/20 150.6/150.7dBTeam DC Team XS Power Team ISB Steve's Body Shophttp://www.dcsoundlab.com/ Link to comment Share on other sites More sharing options...
keepinitloud Posted August 7, 2010 Report Share Posted August 7, 2010 don't know about hondas but my 300 only had enough room for one fiteen two would have made the box to small but then again I did want some trunk to put stuff in but its not alot can only fit some groceries or smaller items have to measure it up and see if you have enough trunk to do two firing forward sealed off from the trunk might have to build it in the car so a wall might be a better choice Quote 06 chrysler 300C Hemi one mmatts dreadnaut 15 powered by a planet audio vx 2200d fosgate p200 running planet audio 8" midbass drivers and super compression tweeters stock battery and a stinger spv44 Irragi 300 amp alternator big 3 1/0 http://www.stevemeadedesigns.com/board/topic/55075-system-in-my-300c/page__view__findpost__p__763656__fromsearch__1 Link to comment Share on other sites More sharing options...
KushSmokinSerg Posted August 8, 2010 Author Report Share Posted August 8, 2010 i had port and subs forward sealed in the trunk, same set-up, tuned low and it hammered, then i built this. Now when you say "sealed" in the trunk, do you mean like foaming around the edges of the box ? so that the trunk is completely sealed off from the rest of the car? Quote Two Kicker L5 12's Alpine IDA-x305 (I have no use for pandora or the 305 s) Kenwood Graphic Equalizer 1000 watt Hifonics Brutus D Class Mono and a Capacitor that ain't worth shit. Link to comment Share on other sites More sharing options...
Guest Posted August 8, 2010 Report Share Posted August 8, 2010 Now when you say "sealed" in the trunk, do you mean like foaming around the edges of the box ? so that the trunk is completely sealed off from the rest of the car? yes, facing the woofers and port towards the front of the car (pushing box as close as possible to the little "barrier" that separates the trunk and the cabin) and putting expanding foam around the edges so no air gets into the trunk Quote Link to comment Share on other sites More sharing options...
cthedinger Posted August 8, 2010 Report Share Posted August 8, 2010 You need to have subs facing forward and port forward, It has to be sealed off. You need around 20-22 sq inches of port per cube. And tune the box some where around 36-40 hertz and the db's will follow. Quote If you have any questions PM me or Add me on Facebook CLICK ME! Shop at ct-sounds.com Subscribe to us on YouTube Link to comment Share on other sites More sharing options...
KushSmokinSerg Posted August 8, 2010 Author Report Share Posted August 8, 2010 yes, facing the woofers and port towards the front of the car (pushing box as close as possible to the little "barrier" that separates the trunk and the cabin) and putting expanding foam around the edges so no air gets into the trunk Thanks! Thats exactly what I was wondering about the barrier between the trunk and cabin. What kinda foam should I use? Would they sell it at like lowes or home depot? Quote Two Kicker L5 12's Alpine IDA-x305 (I have no use for pandora or the 305 s) Kenwood Graphic Equalizer 1000 watt Hifonics Brutus D Class Mono and a Capacitor that ain't worth shit. Link to comment Share on other sites More sharing options...
KushSmokinSerg Posted August 8, 2010 Author Report Share Posted August 8, 2010 You need to have subs facing forward and port forward, It has to be sealed off. You need around 20-22 sq inches of port per cube. And tune the box some where around 36-40 hertz and the db's will follow. Alrite, i like the sound of that. So i'm gonna have 2 12 inch dc audio's. What would you recommend for tuning? Oh & a quick question, do you think those 12's are gonna be a big difference from the l5's? Sure thats a stupid question, but i'm just wondering haha. Quote Two Kicker L5 12's Alpine IDA-x305 (I have no use for pandora or the 305 s) Kenwood Graphic Equalizer 1000 watt Hifonics Brutus D Class Mono and a Capacitor that ain't worth shit. Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.