Jump to content
Sonic Electronix

Need some wisdom from someone (advise pls)


Recommended Posts

price range for the amp? what ohm are the coils?

32hz for the box will sound good.

If I answered you in a well mannered, informative way, you asked a good question or had a good attitude. If I was an asshole, you asked a stupid question or you had a fucktard attitude... or I was in a bad mood.

Team BassickHU: Pioneer AVIC Z110Front: Peerless SLS 6.5", Peerless HDS 4", Rainbow tweeter - running activeAmp: JL HD600/4 and DC 4 channel (bridged to midbass)Processor: JBL MS-8Subs: 2x 12" AA MayhemsAmp: DC 3kElectrical: DC power 270xp alt. 1/0 big 4. XSpower D3400 and six D680s.

http://www.stevemeadedesigns.com/board/topic/121795-29-update-the-buick-is-getting-a-rebuild/

Top career scores: DBdrag 151.7 MECA SQ 82.25My SOTM build

Yeah. im pretty sure they dont warranty retarded people.

Link to comment
Share on other sites

i have two kicker comps running on a 600 rms amp @ 1ohm and my box is tuned to 37hz and it sounds good and hits hard but what is your price range cause u can get rockford amps around the $300 heres the amp i would run http://www.sonicelectronix.com/item_9103_Rockford+Fosgate+Power+T500-1bd.html and i have been dealing with them for a while now and have had no issues

Build in progress

Alpine CDEHD-138BT

Alpine SPX-17PRO 2x

Alpine SWS-15d2 2x

Alpine PDX-V9 2x

Alpine PDX-M12

Stinger SPC5050

Stinger 1/0ga and 4ga

Audioquest interconnects and Speaker wire

Dynomat 10455 mega bulk pak

Dynomat 1/8 and 1/4 liner

All that in a Reg cab truck and it wont be a blow though

Link to comment
Share on other sites

i have two kicker comps running on a 600 rms amp @ 1ohm and my box is tuned to 37hz and it sounds good and hits hard but what is your price range cause u can get rockford amps around the $300 heres the amp i would run http://www.sonicelectronix.com/item_9103_Rockford+Fosgate+Power+T500-1bd.html and i have been dealing with them for a while now and have had no issues

Thnx wfw5607 I saw that amp to but wasn't sure it would be enough for them, also I decided to build the box and tune it at 32hz.

Link to comment
Share on other sites

Considering these are some entry level subs and have "chitty" specs, I would go small (2 cubes max) box, with a small port (10-11 in^2/ft^3), tuned to high 30's low 40's.. or even do a sealed box, and run ~500wrms to the pair to get the best overall result out of them.

my personal recommendations

Edited by footlongsam

--Sampson cool.gif

816-591-6592

www.kcrimshop.com

Link to comment
Share on other sites

Considering these are some entry level subs and have "chitty" specs, I would go small (2 cubes max) box, with a small port (10-11 in^2/ft^3), tuned to high 30's low 40's.. or even do a sealed box, and run ~500wrms to the pair to get the best overall result out of them.

my personal recommendations

x2 this. i dont know why you would be willing to spend 300-700 for $100 worth of woofer though

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Who's Online   1 Member, 0 Anonymous, 508 Guests (See full list)

×
×
  • Create New...