CjM420 Posted September 11, 2010 Report Share Posted September 11, 2010 I have 2 RF p2d412's in the RF factory box they are bridged at 4 ohms on a 600 watt lightning strike amp. I usually listen to my music with the volume around 20 on my kenwood HU which goes to 30. But if i turn it up over 23 or 24 my HU turns off and on real quick and im sure thats caused by the voltage drop making my amp clip. Am i correct about that? But i need some suggestions on what to do to make my system work at its full potential and sound as good as it can. Any input would be appreciated. Link to comment Share on other sites More sharing options...
byers319 Posted September 11, 2010 Report Share Posted September 11, 2010 Use a dmm and check your volts first. And the only real way to stop clippin is using a o-scope and setting your gains and find where your radio clips Link to comment Share on other sites More sharing options...
skittlesRgood Posted September 11, 2010 Report Share Posted September 11, 2010 wow, voltage drop from a 600w amp thats probably over rated? well, put the multi meter on there and see what the voltage is doing. do you have loudness and bass boost on? If I answered you in a well mannered, informative way, you asked a good question or had a good attitude. If I was an asshole, you asked a stupid question or you had a fucktard attitude... or I was in a bad mood. Team BassickHU: Pioneer AVIC Z110Front: Peerless SLS 6.5", Peerless HDS 4", Rainbow tweeter - running activeAmp: JL HD600/4 and DC 4 channel (bridged to midbass)Processor: JBL MS-8Subs: 2x 12" AA MayhemsAmp: DC 3kElectrical: DC power 270xp alt. 1/0 big 4. XSpower D3400 and six D680s. http://www.stevemeadedesigns.com/board/topic/121795-29-update-the-buick-is-getting-a-rebuild/ Top career scores: DBdrag 151.7 MECA SQ 82.25My SOTM build Yeah. im pretty sure they dont warranty retarded people. Link to comment Share on other sites More sharing options...
Freshman6969 Posted September 11, 2010 Report Share Posted September 11, 2010 my h/u likes to randomly shut off when i hit the volume knob in sometimes :/ Legal TL scores145.6 on the dash sealed up in the low 40hz area with the port out145.5 on the dash sealed up @30hz with the port inless then 1k clamped on a 3.5k! Why would you EVER WANT flex?huh?...flex is what can make the lows lower and more air being pushed correct? My FeedbackJeep-BuildlogPT LOSER buildlog Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.