Hotdog Posted October 23, 2010 Report Posted October 23, 2010 There has to be an easy way to do this but I cant figure it out. Every time I get 4 sides done and use the push tool to get my 3/4" with no problem. But when I go to put the top or side on it want's to fill in the whole area and I don't want it to. Can you enplane this process to me. Thank You Quote (NEW) 2004 F-150 Build Log -->http://www.stevemeadedesigns.com/board/topic/192208-hotdogs-f-150-build-log/ 2003 Mercury Mountaineer Build Log --> http://www.stevemeadedesigns.com/board/topic/114380-hotdogs-2003-mountaineer-build-log-20-removed/page__gopid__1602379#entry1602379 2008 Equinox Build Log --> http://www.stevemead...g/#entry1475764
Sanitarium Posted October 23, 2010 Report Posted October 23, 2010 draw the bottom. push/pull to size. draw the 4 sides ON the bottom with the line tool. push/pull them to height. top gets tricky. you have to make it to the side and then move it to the box. Quote
Sanitarium Posted October 23, 2010 Report Posted October 23, 2010 measure draw cleanup drag to size Quote
Hotdog Posted October 23, 2010 Author Report Posted October 23, 2010 Ok, ill try that. And I have done that before where you draw the top separately then move it over but I thought there was an easier way. Quote (NEW) 2004 F-150 Build Log -->http://www.stevemeadedesigns.com/board/topic/192208-hotdogs-f-150-build-log/ 2003 Mercury Mountaineer Build Log --> http://www.stevemeadedesigns.com/board/topic/114380-hotdogs-2003-mountaineer-build-log-20-removed/page__gopid__1602379#entry1602379 2008 Equinox Build Log --> http://www.stevemead...g/#entry1475764
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.