Box Help? Ports?

[stang_01]

I have box with no port for two 12s. With the opening for a port in the center of both subs. The oppening in the center is about 5 inches. I want to do a slot port. The box is (34 1/2 x 22 1/2 x 13 3/4) those are the internal specs. I want to tune the box low. How deep should I make the port and how long should it be when it turns left or right. Please help.

[dwright27]

you will have a nice hard time getting that box in the trunk of that stang.

[stang_01]

you will have a nice hard time getting that box in the trunk of that stang.

The box box fits nice and snug. After lots of cutting. Now the hard part tunning the box.

[dwright27]

tunning is the easy part.

[dwright27]

with a 5 inch openming from inside to inside, make your cuts like this.

2 pieces cut 16 x 12.25 x 16 x 12.25

2 pieces cut 8 x 12.25

tunes 33 hertz or so, somewhere close to there.

correct me if im wrong guys!!!!!

[stang_01]

with a 5 inch openming from inside to inside, make your cuts like this.

2 pieces cut 16 x 12.25 x 16 x 12.25

2 pieces cut 8 x 12.25

tunes 33 hertz or so, somewhere close to there.

correct me if im wrong guys!!!!!

Thanks I had no clue where to start. Tuning calculators are confusing as hell.

[kingsuv]

BBP has you at 13.75 x 5 x 20 for your slot port

Or you can add length to your Areo ports. It calls for 16.45 x 2

[stang_01]

BBP has you at 13.75 x 5 x 20 for your slot port

Or you can add length to your Areo ports. It calls for 16.45 x 2

You wouldnt happen to have extra tubing for the areo ports would you???

Ill buy then off you ??? And whats BBP

Edited August 18, 2007 by stang_01

[kingsuv]

You wouldnt happen to have extra tubing for the areo ports would you???

Ill buy then off you ??? And whats BBP

Of course I do, You already have the ports so the tubing is useless to me

And BBP is BassBox 6 Pro. It's a building software. It's ok I guess

[dwright27]

got ,mine from RE