No Bass Coming out?

[dunkoholic]

anyone got Ms paint or photoshop and draw the line to the amp for me.. thanks again..

[gcs8]

the the first 2 or last 2 terminals, or you can wire 2 subs a peace to 2 ohm load then use one set for each set of the subs. those terminals are wired in Parnell if i remember correctly. but you don't bridge the amp, really you can just ignore the 2 on the right unless you are going to strap 2 amps together. so [+][-][empty][empty].

[dunkoholic]

the the first 2 or last 2 terminals, or you can wire 2 subs a peace to 2 ohm load then use one set for each set of the subs. those terminals are wired in Parnell if i remember correctly. but you don't bridge the amp, really you can just ignore the 2 on the right unless you are going to strap 2 amps together. so [+][-][empty][empty].

cool thanks, imma try that.. also, what kind of rca do u guys recommend for this up. i mind as well upgrade that too. thanks...

[gcs8]

this is what i use http://www.knukonceptz.com/productDetail.cfm?prodID=KARSS2.6M

[dunkoholic]

the the first 2 or last 2 terminals, or you can wire 2 subs a peace to 2 ohm load then use one set for each set of the subs. those terminals are wired in Parnell if i remember correctly. but you don't bridge the amp, really you can just ignore the 2 on the right unless you are going to strap 2 amps together. so [+][-][empty][empty].

i tried this and still only getting about 20% bass output..

Imma try rewiring my subs and see what happens..

[dunkoholic]

can someone sketch up the new wiring diagram on this pix... thanks...

New amp is Sundown Saz-1500D

Subs are RE SRX 2 Ohms per sub

[VIP3R]

you said there dual voice coil at 2 ohms?

you want a 1 ohm load?

and personally, ive had similiar problems like you...

still cant figure it out..

what headunit do you have out of curiousity?

Edited December 10, 2010 by VIP3R

[sundownz]

Are your LPF and subonic settings messed up ?

We've seen this many times where most of the bass is getting canceled out by conflicting filters.

[dunkoholic]

Are your LPF and subonic settings messed up ?

We've seen this many times where most of the bass is getting canceled out by conflicting filters.

Jacob,

are u talking about on the Amp? What is LPF? sorry man, don't know nothing about this stuff... trying to learn though..

I also have a DD 8's that's currently hooked up to my armrest, Pushed by a little Fostgate amp..... i just tried hooking it up to my twelves and it works.. it pounds, so i really don't know what's going on with my new amp right now..

[dunkoholic]

you said there dual voice coil at 2 ohms?

you want a 1 ohm load?

and personally, ive had similiar problems like you...

still cant figure it out..

what headunit do you have out of curiousity?

yeah, looks like a have it wired like this right now... my head unit is an alpine 9883 i think... i'll check later for the exact model...