bdubii Posted January 7, 2011 Author Report Posted January 7, 2011 Can u say "got port?". 4.5"x35.5"x23" and tuned to 29hz with 159.75in^2 of port area equaling 15.975in^2/ft^3 My build, four 15's walled: http://www.stevemeadedesigns.com/board/topic/106855-07-tacoma-walled-off-with-4-15s/page__p__1487297#entry1487297
bdubii Posted January 7, 2011 Author Report Posted January 7, 2011 The dowel's are just sitting there. I will glass them in soon. My build, four 15's walled: http://www.stevemeadedesigns.com/board/topic/106855-07-tacoma-walled-off-with-4-15s/page__p__1487297#entry1487297
bdubii Posted January 8, 2011 Author Report Posted January 8, 2011 I got the port glassed in and also the dowel's all glassed up. I finished making all the rings and bonded them together with liquid nails. My build, four 15's walled: http://www.stevemeadedesigns.com/board/topic/106855-07-tacoma-walled-off-with-4-15s/page__p__1487297#entry1487297
bdubii Posted January 8, 2011 Author Report Posted January 8, 2011 I tried using the router around the edges of the box with no guide and that came out pretty horrible My build, four 15's walled: http://www.stevemeadedesigns.com/board/topic/106855-07-tacoma-walled-off-with-4-15s/page__p__1487297#entry1487297
bdubii Posted January 9, 2011 Author Report Posted January 9, 2011 I rounded over the inside of the rings and attached them to the box with 12ft of 1/4" dowel's and hot glue. My build, four 15's walled: http://www.stevemeadedesigns.com/board/topic/106855-07-tacoma-walled-off-with-4-15s/page__p__1487297#entry1487297
bdubii Posted January 9, 2011 Author Report Posted January 9, 2011 My build, four 15's walled: http://www.stevemeadedesigns.com/board/topic/106855-07-tacoma-walled-off-with-4-15s/page__p__1487297#entry1487297
bdubii Posted January 9, 2011 Author Report Posted January 9, 2011 My build, four 15's walled: http://www.stevemeadedesigns.com/board/topic/106855-07-tacoma-walled-off-with-4-15s/page__p__1487297#entry1487297
bdubii Posted January 9, 2011 Author Report Posted January 9, 2011 My build, four 15's walled: http://www.stevemeadedesigns.com/board/topic/106855-07-tacoma-walled-off-with-4-15s/page__p__1487297#entry1487297
SoCaLBaMF Posted January 9, 2011 Report Posted January 9, 2011 2004 Bagged Trailblazer (4)18" Sundown Nsv3s (4) Taramps HD10000s, Taramps DSP3000, Lanzar opti 250x2, AB 100x4 (2)DC power SP 270s, (14)XS Power d3100s, (1)d6500
bdubii Posted January 14, 2011 Author Report Posted January 14, 2011 I've been lazy the past few days but I got some work done today. I duraglassed the mounting points onto the molds and will do the back once that dries. Also I glassed together each ring and some of the dowel's holding the rings up to hold up when I stretch the fabric over. Then I stretched some ponte over everything and added a layer of resin. My build, four 15's walled: http://www.stevemeadedesigns.com/board/topic/106855-07-tacoma-walled-off-with-4-15s/page__p__1487297#entry1487297
Recommended Posts
Archived
This topic is now archived and is closed to further replies.