DodgerCannon Posted December 22, 2010 Author Report Share Posted December 22, 2010 Ok guys I get that ill have voltage drop, and ill fix it once I find how bad it is.... why fix something I don't even know will be broken. Thanks for the other "good" comments fellas. Link to comment Share on other sites More sharing options...
Watch the bass Posted December 22, 2010 Report Share Posted December 22, 2010 Ok guys I get that ill have voltage drop, and ill fix it once I find how bad it is.... why fix something I don't even know will be broken. Thanks for the other "good" comments fellas. Give us a TL vid if your voltage up. "in the abundance of water, the fool is thirsty" Bob Marley Link to comment Share on other sites More sharing options...
DodgerCannon Posted December 22, 2010 Author Report Share Posted December 22, 2010 I will once install is done Link to comment Share on other sites More sharing options...
DodgerCannon Posted January 22, 2011 Author Report Share Posted January 22, 2011 Not updated for a while but got a fair bit done. First bit of 18mm up.. will be double skinning it to 36 mm all round Good days work today... got a fair bit done. Trimmed all the foam and sanded the pu glue down from the join ready for the second sheets of mdf. Started on the drivers side ... bottom piece was already in and foamed. Nice thick bead of pu glue. Top piece cut and held in with brakets until foam and glue sets. Cut up the second piece of mdf for passenger side bottom. Little tip of jj. sand the shine off the mdf before adding pva. Cheers pal. Covered in pva with roller.... another tip thanks to jj. and the proffessa. Screwed in Top part cut and glued and screwed. Passengers side is solid now. The gap at the top will be fiberglass nice and thick to get some more volume. Link to comment Share on other sites More sharing options...
DodgerCannon Posted January 22, 2011 Author Report Share Posted January 22, 2011 Doubled up the drivers side and expanding foamed round the edges to seal it up nice. 4 of the 6v cells in and wired. Big wheel well but still not big enough for all 6 batteries. Battery tray expanding foamed in. Snugg fit. Cables all connected... thought it was a good idea to use butterfly nuts for ease of connection but I'm going to swap them for nuts because they just don't get tight enough for my liking, scared of them coming loose. Backs on, also done some work on the centre partition and brace. Cutout for the back. Just about fitted two outta one sheet. Double 18mil centre partition Link to comment Share on other sites More sharing options...
DodgerCannon Posted January 22, 2011 Author Report Share Posted January 22, 2011 Also built some runs for the cable. Scuffed up where I was going to glass with the wire wheel. Scuffed up the dynomat and paint off the car so it had something to cling to 4 layers of 450gm over the arch 2 layers on the joints Decided Im changing the front end come end of feb to 4 sets of Hybrid Audio Imgine 6.5" components powered by two Sundown SAX 100.4 . Wanted something that will sound nice daily driving but will keep up with the monsters in the back trying to blow my screen out Managed to get 3 consecutive days off work next week so hoping to get a lot done Stay tuned for more updates Link to comment Share on other sites More sharing options...
dunkoholic Posted January 23, 2011 Report Share Posted January 23, 2011 nice build mate! The Project!! 1954 Trunk Build http://www.stevemeadedesigns.com/board/topic/102529-1954-chevy-belair-trunk-build/ ----------------------------------------------------------------------------------- The Daily!! Head Unit: Alpine 9883 Subwoofer: 2 12's DC Level 4 XL Amplifier: New DC 3.5 K Rear Center Console: 1 8' DD 1508 Amplifier: Rockford fosgate 500 Mids and Tweets: Beyma tweets e36 Trunk/Subwoofer Build http://www.stevemeadedesigns.com/board/ind...showtopic=27903 Link to comment Share on other sites More sharing options...
zayres29 Posted January 23, 2011 Report Share Posted January 23, 2011 big systems in small cars FTW Btw that was the first person. Ever banned by me while dropping a deuce. Feel privileged Link to comment Share on other sites More sharing options...
tlee2 Posted January 24, 2011 Report Share Posted January 24, 2011 Looking nice 6 Sundown X 15s 2 Sundown NS1 V2s C Pillar 4th order Bagged Suburban on 24s http://youtube.com/tlee333 Link to comment Share on other sites More sharing options...
geoffh10 Posted January 24, 2011 Report Share Posted January 24, 2011 It's the biggest I can fit on my car without custom brakets and alternators.... if u have problems ill change it, the car is only a 1.4tdi so adding stupid amounts of alts will lead to no power. Been told ill be fine with the power I have as there are no big alt suppliers in the UK. mechman makes a 270 amp alt for audi and vw just thought id let you know Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.