Aero ports

[lowsound10]

Would a 4 inch aero port get alot of air out for a single 12"?...say a dc level 3?

If that makes sense for what im asking. Im going to seal my trunk with a single 12 and i want to be able to move some good air. I know itll prolly take more but just wondering

thanks!

[skittlesRgood]

two 4"s or one 6"

[Socky]

Depends on your box, if you want to move air, try around 12-16sq in of port per cube.

[bassahaulic]

Depends on your box, if you want to move air, try around 12-16sq in of port per cube.

For aero ports this rule will work.

For slot ports 20+ is needed.

[lowsound10]

i was thinkin H 13", W 30", D 15"... i can go bigger on the width a lil. but i want to tune it around 33 hz

[skittlesRgood]

you wont be able to fit a aero port big enough in to that box to get the tuning you want. you would need to use pvc and pipe bends or make part of the port external.

[bassahaulic]

1 6" aero would be perfect.

[Tek]

Depends on your box, if you want to move air, try around 12-16sq in of port per cube.

For aero ports this rule will work.

For slot ports 20+ is needed.

20 is awesome if possible, however it is certainly not needed.

[Freshman6969]

this has to be the 10th aero port thread ive seen the past 3 days, use the search button people

/rent a nate(n8ball2013, for all you noobcakes )

[lowsound10]

you wont be able to fit a aero port big enough in to that box to get the tuning you want. you would need to use pvc and pipe bends or make part of the port external.

thats what i thought damn. im trying to build the box as small as possible to have net around 1.70ft^3 for like i said a dc level 3. this would be my first time working with aeros too soo thats why i would need someones help if id have to do bends. or stick with slot port