Jbabycsx Posted January 23, 2011 Report Posted January 23, 2011 Is it possible to build an 8 using an old HX2 motor? If so where can I find the soft parts to build it. Keep in mind the HX2 is a 4" coil. Thanks 2000 GMC Sonoma AQ20 FTMFW! 4 DC XL 15's Cadence ZRS-C9 Infiniti Kappa 3.5's and 6x8's Bravox 6.5 components
MrSkippyJ Posted January 23, 2011 Report Posted January 23, 2011 Is it possible to build an 8 using an old HX2 motor? If so where can I find the soft parts to build it. Keep in mind the HX2 is a 4" coil. Thanks 4" coil is kinda big for an 8 don't you think? doesn't leave much room for a spider. F150: Stock 2019 Harley Road Glide: Amp: TM400Xad - 4 channel 400 watt Processor: DSR1 Fairing (Front) 6.5s -MMats PA601cx Lid (Rear) 6x9s - TMS69
Socky Posted January 23, 2011 Report Posted January 23, 2011 With a 4in coil i would atleast make it a 12". You can just fixmyspeaker.com for parts. Jeep Cherokee 4dr -4.75 in front, new rusty's 4.5 in rear leafs -micky thompson 35x14.50x15 -locker rear -Rusty's offroad Engine/transmission/transfer case/crossmember/gas tank skid plates -Warn front bumper with 8000lb winch -Custom rear bumper -Warrior product tube doors (summertime) -Optima redtop (starter) -26XK miles and still runs like a bat out of hell Kenwood H/U 1/0 wire, 136 amp alt 200 ah batteries 12.7 daily 2 Apsm 1500 @ 2 ohm strapped on zv3 d1 with ns softparts Mb quart 125.4 wired to 4 aura 6's 3.6 cube box tuned to 36 plays down to 23hz
Jbabycsx Posted January 23, 2011 Author Report Posted January 23, 2011 Is it possible to build an 8 using an old HX2 motor? If so where can I find the soft parts to build it. Keep in mind the HX2 is a 4" coil. Thanks 4" coil is kinda big for an 8 don't you think? doesn't leave much room for a spider. True, didnt really think about that lol 2000 GMC Sonoma AQ20 FTMFW! 4 DC XL 15's Cadence ZRS-C9 Infiniti Kappa 3.5's and 6x8's Bravox 6.5 components
Recommended Posts
Archived
This topic is now archived and is closed to further replies.