Purplehaze Posted February 24, 2011 Author Report Share Posted February 24, 2011 The wires are all ready! It's getting there! The Breaker Pannel, or the "inside" of the "breaker box" The rear view monitor. This thing is cool! It is also hooked to the reverse camera. Next step, wiring crossovers! Kickin' Cruiser Seller Feedback Stage 3 Dash, Door Panels,4th Order wall 4 - 15'son a DC 5.0K 2 DC 5.0K'sSolo X 15 (v.2) Sub Build Link to comment Share on other sites More sharing options...
Purplehaze Posted February 24, 2011 Author Report Share Posted February 24, 2011 And a few pics of the car More on the way! Kickin' Cruiser Seller Feedback Stage 3 Dash, Door Panels,4th Order wall 4 - 15'son a DC 5.0K 2 DC 5.0K'sSolo X 15 (v.2) Sub Build Link to comment Share on other sites More sharing options...
Purplehaze Posted February 27, 2011 Author Report Share Posted February 27, 2011 Okay, well I got more work done this weekend, and I have several pics, and a couple of videos. Got the crossovers mounted, and the holes drilled in the rt places on Friday evening. Then I spent the rest of the evening deciding how I wanted to mount the amps. And you KNOW I had to open them up! Kickin' Cruiser Seller Feedback Stage 3 Dash, Door Panels,4th Order wall 4 - 15'son a DC 5.0K 2 DC 5.0K'sSolo X 15 (v.2) Sub Build Link to comment Share on other sites More sharing options...
Purplehaze Posted February 27, 2011 Author Report Share Posted February 27, 2011 So Saturday morning, I got up bright and early to solder spade terminals for the crossovers, and try to get the wires all ran to the amp rack. Here is a little video, and some more pics And the crossover wires all finished! More wires anyone? Kickin' Cruiser Seller Feedback Stage 3 Dash, Door Panels,4th Order wall 4 - 15'son a DC 5.0K 2 DC 5.0K'sSolo X 15 (v.2) Sub Build Link to comment Share on other sites More sharing options...
Purplehaze Posted February 27, 2011 Author Report Share Posted February 27, 2011 Cutting up the amp rack. I would hate to have had to do this w/o my Dremel. Wiring the amps! Workin Late! Amps r wired! Kickin' Cruiser Seller Feedback Stage 3 Dash, Door Panels,4th Order wall 4 - 15'son a DC 5.0K 2 DC 5.0K'sSolo X 15 (v.2) Sub Build Link to comment Share on other sites More sharing options...
Purplehaze Posted February 27, 2011 Author Report Share Posted February 27, 2011 Okay, so I got the amps installed, so the next part is to build a box for both subs. Gotta make a trip to the lumber store tomorrow to get that started. But since I have 1 sub that is 5 months old, and one that is 1 month old, I swapped them out as soon as I got it so it could "even up" with the other one before the go under the same load. So here is my setup now with only the one sub. I do want to say it sounds like I have two now! The Kicker amps are SWEET!!! Remember, this is temporary, I still have another sub! The "Breaker Box" Underneath shot 1st Demo. NOT YET TUNED! Kickin' Cruiser Seller Feedback Stage 3 Dash, Door Panels,4th Order wall 4 - 15'son a DC 5.0K 2 DC 5.0K'sSolo X 15 (v.2) Sub Build Link to comment Share on other sites More sharing options...
MrSkippyJ Posted February 28, 2011 Report Share Posted February 28, 2011 man i absolutely love it! glad to see you enjoying it as well. feels good to do your own work eh? F150: Stock 2019 Harley Road Glide: Amp: TM400Xad - 4 channel 400 watt Processor: DSR1 Fairing (Front) 6.5s -MMats PA601cx Lid (Rear) 6x9s - TMS69 Link to comment Share on other sites More sharing options...
Purplehaze Posted February 28, 2011 Author Report Share Posted February 28, 2011 man i absolutely love it! glad to see you enjoying it as well. feels good to do your own work eh? Thanks! Yes it does, I have had a blast doing everything so far! I'll be building the new box this week with my dad, he has EVERYTHING to do it right and make it easy. After that it's on to a whole lot of fiberglass work. I can't wait! Kickin' Cruiser Seller Feedback Stage 3 Dash, Door Panels,4th Order wall 4 - 15'son a DC 5.0K 2 DC 5.0K'sSolo X 15 (v.2) Sub Build Link to comment Share on other sites More sharing options...
MrSkippyJ Posted February 28, 2011 Report Share Posted February 28, 2011 right on man, i am going to try my hand at some fiberglass this summer with 2 12" DC level3s. WIll be my first glassing attempt, I will keep tuned in to see how yours goes. no pressure! F150: Stock 2019 Harley Road Glide: Amp: TM400Xad - 4 channel 400 watt Processor: DSR1 Fairing (Front) 6.5s -MMats PA601cx Lid (Rear) 6x9s - TMS69 Link to comment Share on other sites More sharing options...
Spitfire2k6 Posted February 28, 2011 Report Share Posted February 28, 2011 Looks great man, doin a great job. Cant wait to see the end product. And btw, i have a 12" L7... They are a great sub Live life to the full... Then TURN THAT BITCH UP! Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.