best amp for type-r under 600 (on ebay)

[nCOMP1337]

still dont know ohm load, but he definitely should make sure its no less than 1 ohm, so with 4, and im thinking dvc 4 ohm, he should wire them to 2 ohms, especially so he doesnt try to get too much from his electrical, unless he plans to do the big 3 (should do anyways), upgrade bats(he has one already), and maybe an alt

[mr.alpine]

So we still don't know what ohm load he needs the power at?

My subs are 4ohm.. I'm assuming they can be ran at 2 or 4 correct? I think I'm jus going to run three instead of four

[nCOMP1337]

it dpeen ds on how many subs you have at what impedance

dvc 4 ohm subs in which case you have 3 can be run at 2.67 and 6, maybe another configuration

http://www.the12volt.com/caraudio/woofer_configurations.asp?Q=3&I=42#results <---wiring diagram for 3 dvc 4ohm subs

dvc 4 ohm subs in which you have 4 can be ran at .5, 2, and 8 ohms

http://www.the12volt.com/caraudio/woofer_configurations.asp?Q=4&I=42#results <wiring diagram for 4 dvc 4 ohm subs

now i guess i should ask are they single voice coil or double voice coil

either way unless you have good electrical you dont want to drop under 1 ohm, and your best bet would probably be 2 ohms

so 4 wired to 2 or 3 wired to 2.67 most likely id say

[gally]

the mrp m 2000 of alpine costc 440$(dolars)

and it gives you 1500WRMS at 4 ohms and 2000wRMS at 2 ohms...

[Watch the bass]

Buy these offer and sell the other one.