Which Port?

[C.Sanchez.A]

Option 2.51 (LOL) 35.25 square inch port tuned to 36Hrz

OR

Option 4 same 35.35 tuned to 33Hrz

I'm starting to run out of ideas.

Edited February 4, 2011 by C.Sanchez.A

[Robert8252]

#2 with a lot more port if possible

Here is Option 2 with the biggest port I can get 35.25 square inches tuned at 33Hrz.

I still like this the best out of the 5. Best port range and best port placement without interfering with the sub too much. Maybe mount the sub just a inch higher so the bottom right corner doesn't act as a hole.

[C.Sanchez.A]

#2 with a lot more port if possible

Here is Option 2 with the biggest port I can get 35.25 square inches tuned at 33Hrz.

I still like this the best out of the 5. Best port range and best port placement without interfering with the sub too much. Maybe mount the sub just a inch higher so the bottom right corner doesn't act as a hole.

One thing I was thinking of doing was cut the corner into a 45 (instead of just rounding it), this way I would have more space between the sub and port wall. (I would be reenforcing it with resin and such)

[C.Sanchez.A]

Ok I think I've narrowed it down to these two:

35.25" tuned to 36Hrz

35.25 tuned to 33Hrz

[C.Sanchez.A]

I don't know if any one even cares but, here is the final design I'm going with. I made the box wider and had to shrink the port down to 10.25x3 instead of 11.75x3. This means it is no longer a slot port. I will build it this saturday and try to get a test out of it. It won't be with the intended sub (still waiting to buy it) but, I will still test it with a 12" RF P2 (Hope fully)

I would also like to thank those that did provide imput.