8ight Posted April 19, 2013 Report Share Posted April 19, 2013 185 watts x 2 RMS at 4 ohms 380 watts x 2 maximum power at 4 ohms 200 watts x 2 RMS at 2 ohms 500 watts x 2 maximum power at 2 ohms 0.1% THD @ Rated, bridged 400w x 1 @ 4 ohms Pretty terrible amp, got it for $75 as a temporary. A lot better than I expected on the inside, the construction is very good and the parts aren't complete junk, the ugly blue caps are actually Rubycon units. Although it definitely makes rated power, and the heatsink is all metal besides the silver nameplate that says "Xplod" the design itself is awful this thing sounds like a $75 amp. I would call this a good value if it didn't just generate distortion. I'm gonna hate Link to comment Share on other sites More sharing options...
newls1 Posted April 19, 2013 Report Share Posted April 19, 2013 dude, there is NOTHING inside that bish *EDIT** Do i see a nike swoosh near the speaker terminal area on the board. IS this bish made by nike? I love my staffie So anti FACEBOOK it isn't even funny Link to comment Share on other sites More sharing options...
SnowDrifter Posted April 19, 2013 Report Share Posted April 19, 2013 I think that's just a sharpie mark ~~~~~~~~SAY NO TO PHOTOBUCKET~~~~~~~~ Snow's DD-1 tracks here: https://www.stevemeadedesigns.com/board/topic/167433-snows-dd-1-tracks/ My take on OFC vs CCA: https://www.stevemeadedesigns.com/board/topic/110381-things-that-piss-you-off-in-the-car-audio-world/?do=findComment&comment=2461444 Link to comment Share on other sites More sharing options...
8ight Posted April 19, 2013 Author Report Share Posted April 19, 2013 dude, there is NOTHING inside that bish *EDIT** Do i see a nike swoosh near the speaker terminal area on the board. IS this bish made by nike? Plenty of transistors, that's where the magic happens. I'm gonna hate Link to comment Share on other sites More sharing options...
Josh Field Posted June 2, 2013 Report Share Posted June 2, 2013 One thing I've learnt working.on.home amps . Rubicon are awesome caps. That amp doesn't look bad (- Ford Focus Titanium LW sedan ) REBUILD IN PROGRESS STAND BY Link to comment Share on other sites More sharing options...
Ecrews87 Posted March 1, 2016 Report Share Posted March 1, 2016 I have the xm-gtx1852 and it decided to stop working. The green power light comes on the way it's supplied to but nothing happens!!! I took apart in hopes that I could see the issue but it looks good internally. Not sure how to post photos but there is ONE spot I find questionable. Its on the underside from the posted photo. There are a number of small square "chips" the largest one of them has a small discoloration on one side. Although it doesn't seem to be significant enough to cause a problem , I am honestly very ignorant to the internal organs so I'm hoping someone here can help me. Basicly my question is, what would cause the green power light to remain on but not create any sound? The protection light never comes on unless I make it! I know for sure that wiring is 100% I am currently running a 600.4 high end jensen and it works fine (just not enough for two Kentwood 12's and a Memphis 15. Please let me know what's going on with this amp thank you in advance. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.