m720bos Posted February 18, 2015 Report Share Posted February 18, 2015 I just recently purchased two JL Audio 12" w7s and im looking to build an enclosure for them. I drive an 07 Dodge Charger so space is limited but I really want them ported if anyone has any input or box designs it would be greatly appreciated. Link to comment Share on other sites More sharing options...
m720bos Posted February 18, 2015 Author Report Share Posted February 18, 2015 how about it "joe x" can you save the day? Link to comment Share on other sites More sharing options...
Triticum Agricolam Posted February 18, 2015 Report Share Posted February 18, 2015 No one can help you until we know what your max dimensions are, how much power you are going to run, and what your goals of the system are. "Nothing prevents people from knowing the truth more than the belief they already know it.""Making bass is easy, making music is the hard part."Builds: Link to comment Share on other sites More sharing options...
m720bos Posted February 19, 2015 Author Report Share Posted February 19, 2015 36" wiidth 20" deep 15" tall is about the biggest box i have been able to fit i there before so around those dimensions. i listen to a lot of rap and r&b. I am aiming for loud and low but without sacrificing too much sq Link to comment Share on other sites More sharing options...
m720bos Posted February 19, 2015 Author Report Share Posted February 19, 2015 i had one of those Q bomb prted prefab boxes in there before and it is a pain in the u kno what to get in and out or even just adjust Link to comment Share on other sites More sharing options...
m720bos Posted February 19, 2015 Author Report Share Posted February 19, 2015 i will be powering the 2 w7s with a hifonics brx2000.1 Link to comment Share on other sites More sharing options...
Joe X Posted February 19, 2015 Report Share Posted February 19, 2015 See if you can fit this, power: to sub(s) rated, amp subsonic filter to 28Hz, minimum port clearance 5 1/2", figure is just an assembly guide:NOTE: If building outside you need to build a cardboard dummy box to test fit in it's way inside. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.