Gravlin216 Posted March 3, 2015 Report Share Posted March 3, 2015 I wanna get a new set of tweeters to replace the polk audio tweeters I threw in there when my rockford t2 tweets went bad. Im looking at the rockford 4ohm super tweeter on amazon for 137$ for the pair. If there's something out there cheaper with good sound and build quality I would consider them. I have a 400-4 to power them. Link to comment Share on other sites More sharing options...
Gravlin216 Posted March 4, 2015 Author Report Share Posted March 4, 2015 Screw it. I just purchased 4 rockford P1T-S tweets. I'm sure they'll be better than the Polk db1001's I have in there now. I recently got the dd-1HV so I'll be able to set all my gains right to make sure I'm not damaging them. Link to comment Share on other sites More sharing options...
Miguels Posted March 4, 2015 Report Share Posted March 4, 2015 how much? my logshttp://www.stevemead...-my-new-set-up/my blow through loghttp://www.stevemead...future-updates/ 96 ss http://www.stevemeadedesigns.com/board/topic/164094-96-impala-ss-build/ Link to comment Share on other sites More sharing options...
Gravlin216 Posted March 4, 2015 Author Report Share Posted March 4, 2015 each pair was 52$ with prime Link to comment Share on other sites More sharing options...
Broke_Audio_Addict Posted March 4, 2015 Report Share Posted March 4, 2015 Setting the gain to the max undistorted volume with tweets might not be the best idea. That being said a lot of people's definition of "music" is a clipped 30 hz sine wave with some 80 IQ knuckle head grunting about committing crimes and his genitals. Link to comment Share on other sites More sharing options...
Gravlin216 Posted March 4, 2015 Author Report Share Posted March 4, 2015 Setting the gain to the max undistorted volume with tweets might not be the best idea. I'll back it off some after I find the exact point where it distorts. Link to comment Share on other sites More sharing options...
Gravlin216 Posted March 4, 2015 Author Report Share Posted March 4, 2015 Each channel will have a tweet and midrange on it. Should I still turn down the gain after I find where it distorts? Link to comment Share on other sites More sharing options...
Broke_Audio_Addict Posted March 4, 2015 Report Share Posted March 4, 2015 I wouldn't run a tweet And a mid on the same channel. That being said a lot of people's definition of "music" is a clipped 30 hz sine wave with some 80 IQ knuckle head grunting about committing crimes and his genitals. Link to comment Share on other sites More sharing options...
Gravlin216 Posted March 4, 2015 Author Report Share Posted March 4, 2015 Each channel goes to a x-over that is then hooked up to the tweets n midrange. I originally installed the rockford T2 6.5 component set but the tweets blew. The midrange is still good I'm just replacing the tweets. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.