Scott Ward

I'd love just one row that'd be the bomb in my truck if I could fit it

Thanks love this site

B stock is blemish item like maybe sundown printing isn't to there spec or glue is showing stuff like that. All the working parts are to spec. it's strictly appearance

Got my two in today look grate thanks

I've lost my user name and password I've tried to reset but system want take what you have sent me

The box has 7.25in of mounting depth. There firing into the bottom of the seat with 2in clearance from the surround . I know of a guy with the same box but has 2 sa12s in it. Each box has its on side with port firing out the side into cab. I love how the e10s sound if i want get more output from the sa's ill just keep the es. Still new to sundown but not car audio just saying

In a 2012 ram quad cab custom order box and 1in lift blocks

Heres the thing my girl wants a system. She loves my e10s so this is where the vs comes in. Should i just get 2 e10s to go in her suv and keep mine or get me 2 sa10s to go in my truck and give her my e10s. I have a custom box to go under my seat both with fit. At 1.1cuft per at 30hz after displacement. Will i see more output with the sa10s over the e's and will i be able to tell. If not ill just keep the e10s. Plenty of clean power. Whats yalls input she couldnt care less

Could make i floating amp rack and mount to the deck led

I always wanted to know how that was done thats just cool

Clean thanks for the help i pulled everything out completely and fond it. Guess being in a hurry and my girl nagging me about her system. I wired one of the terminal backwards. Sorry for the dum question just was on my last nerve. Never pulled the terminal

There d4 both are wired the same but ill check again in the morning. I used stinger wire to keep the wires all the same. Both play and push the same. Just very low output like its splitting the power i have all the positives and negatives together its showing 1ohm at the amp

Im having a problem with out put running at 1ohm. Never had this type problem before. I got 2 e10 blown by po i reconed them installed in a custom fitted box that's 1.1 at 35hz after displacement. The problem is when i hook both together at 1ohm to the amp. its like half the output of just hook up one at 2ohms. Ive checked everything ohm all of it. it doesnt mater watch one is hook up as long as it sees 2 ohm. The amp is a Memphis mcd-1000d its able to go down to 1 ohm. I would be grateful for any help before i buy a new amp.

Guess ill throw them in it hope for the best

I know very little about tuning on ported boxs and dont want it to sound like crap. This will be my first custom ported box. I mostly run sealed in my trucks or a probox in my old suv but thats been 5 years since my last ported box ive learn alot about boxs and most prefab junk. With the money going into this truck i want it right the first time. Thats why im asking here in the sundown area.

I know it will fit. The problem is its custom formed box so that won't work. The box is with in sundowns spec but it tunes lowee

Its a custom box im ordering. Want to makes shore this box will work with the subs and sound good. I can setup sealed boxs all day but not ported

Anyone

im reconing two e10s to put in my quad cab ram. need help with my box its 1.2 cuft per. sub before displacement and tuned to 35hz. would this box be good for dd. dont think it will mater but im powering it with a mc1000d memphis amp. tuning ported boxs is my weak part