Nate197

In the past, I have used a reciprocating saw to cut my subwoofer circles for enclosures and now I am interested in buying a router. I know that I will need a jasper jig to cut the holes but, what kind of bit do I need for the router. Yesterday, I saw the bit you use to round the edges but, I do not know which bit to buy for the actual cutting.

WWWWHHHHHHAAAAAATTTTTTT?

I have heard that people will die at 245-250 decibels which is equivalent to an atom bomb.

okay thanks

Is it okay to put glass cleaner on window tint?

ok thanks for clearing that up for me.

Do you have to ground all the 0 gauge wires separately? Because in the past I would just ground all my batteries and amp through the battery under the hood. I am about to start my build with one red top under the hood and three blue tops in my trunk, will it be a problem for me to ground the batteries and the amp through the negative terminal under the hood or should I ground them separately like you. By the way great job on your build. Thanks

Those people standing there are just dumb

I never fused my alternator positive wire. Isn't the fuse just in case the wire gets bent or burns from the engine.

When a mono amp has two positive speaker terminals and two negative speaker terminals, do the two positive go to the same place as well as the negative terminals go to the same negative place. If I were to wire two dual one ohm speakers in series/parallel into one ohm will the amp read the output as one ohm even if I am only using two out of the four terminals, since the other terminals go to the same place in a mono amp. Sorry about my confusing question

I weighed one and my digital scale said 60 lbs. It could be off one pound. The shipping weight was 69 lbs.

For me animals are fun to pet but, better to chew

what happens if you are in the 120-129.9 class and you go over 129.9 are you disqualified?

How does the bass race class system work?

I was wondering how people over power their subs way over the rms ratings (double). Also, are subwoofers able to go over their rms ratings in certain box designs?

I was thinking about underpowering the two subs for awhile and then upgrading the amp after I get use to how these subs sound and work. I also have never heard anything this loud so I am not exactly sure how they are suppose to sound and operate. Also I did not want to have to make another box in a couple months.

I was thinking about getting two fi btl 18's but, with the amp I have now it will only be pushing 1600 watts rms a sub (3200 watts rms total). I wanted to use the amp I have for now and upgrade to a bigger amp in the future. My question is will 1600 watts rms push the btl's and if it could what size enclosure would I want to build a larger enclosure or a smaller one. I am looking to tune it in the low thirty's for a daily setup.Thanks

I do not understand EXmax fully because the specifications for my sub say that it can handle 16.1 mm. I thought EXmax meant how much excursion the sub could handle. I think my sub is getting about an inch of excursion. What do they mean when they say 16.1 mm thanks.

I was wondering about this also. I have my stock battery under the hood and a hc1800 behind my passenger seat. I hear some people say it is okay but, others say that the battery technologies do not work well together. Also, I am wondering if mixing battery technologies is hard on my alternator. Thanks

Hc 600 is supposed to be equivalent to 100 one farad capacitors and it costs around 100 dollars. It is much more power for your money.