raytard

sub back port back probably is going to be loudest, and easiest and just pm me on here if you want to get back, it forwards to my email anyway

its gonna be real tight everything wise, it would be nice to have an extra~3cubes so you could fit an optimum box ...or just use 3 and throw one in your girls car or something...hint hint noticed you have individual amps on each sub, sooo grab one more, move your rack a little bit to compensate, do 3 wide which would look ill 38wX24hX14d, port 26 wide, 3 high, 20 deep, gives 1.55cube per sub, 16.8sq in port per cube, 40hz tuning , very close to optimum specs from kicker, use some poly fill if you want lower curve and "smoother response" (port 20wx3hx27l gives 32hz tuning, 13sqin/cube if u wanna tune lower) may be a consideration, i think 3 across would look better too

back seats=lower insurance not even kidding at all... look at an aston martin db9 rear seat, the fronts literally touch the rears if youre 6 ft tall and trying to drive, my backpack barely fits in the rear (its also ~10 inches higher than the front, so if youre my height you look over the windshield and take wind right in your face on the highway while being squished) back seats are there cuz it looks better than a carpeted cargo area, and the grandfather said it drops insurance compared to a 2 seater anyway though, that stang is clean as hell, thats alotta armorall

for reference, cvr10's like about 1.75cubes apiece with ~16sqin port/cube, the box comes out ok i guess if i use your max specs... its kinda tight to get the needed port area and displacement, so its sacrificing a little effeciency in order to get it low enough for daily tune so, 38 wide, 25 high, 14 deep, port is 19 wide along bottom, 3 inches high, 23 long this gives a smidge under 5 cubes, or 1.25 apiece for 4 subs (min requirement for volume) 11.52 sqin port/cube, a little low, may hinder max output, but necessary to get volume and tuning correct, still within specs and more than usable, just not optimum 32.17hz tuning sorry its so ugly, its so u get an idea of how it is going to look. this box will work, and you can probably throw a bit more than rms to them since it is a smaller box with a smallish port. Kicker actually reccomends tuning to 40hz, if you want to go that route, just make the port 24 wide, 3 high, 16 long, and use some poly fill in the box (ends up being 40hz tuning, 1.27cuft/sub, 14.15sqin port/cube) leaving it up to you or anyone who has experience with the cvr's, last box i built was a 38hz tune for 3-12's, had quite a bit of low end roll off, but was brutal on higher notes (~50hz-60hz), if you were having problems hitting the lows, the 40hz tune probably wont help matters. if you want to go sealed, anything between 2.4 and 12 cubes will work surprisingly (min and max on spec sheet for 4 subs) if you built the box i gave you without a port at all, its just under 6 cubes and should work i guess, id knock an inch or two off of depth to bring it down a bit and bring up power handling

im a good guesser, and i know exactly what youre describing as far as configuration, if you can give a depth i can mock up a box design for ya, give you rough dimensions/tuning/port size/etc

get another prefab, screw it to the top, and spraypaint "Built to La$t" on it, instant ballin wall for real though, see if you can fit the 4 10-s straight across with a port under, i think your truck is only 37 or 38 across, if it happens to be 42, youre in luck

boon=100% correct go by wattage for a rough estimate of draw if you know your voltage, the resistance doesnt really matter as far as computing draw, but it will drop your effeciency...ive seen alot of amps do like 95%effecient@8ohm and 65%effecient@1ohm, to give you an idea of the difference

put it on in multiple thinner layers sprayed from like a foot-18in away its illegal like everywhere, expect a ticket and to take it off, ive never done it, but i expect some paint thinner could take it off, or a razorblade and some elbowgrease

meh is definitely "eh" with an "m" i use "mhmm" way too much, its that noise when your mouth is closed and you kinda hum in agreement, kind of an uh-huh but its an mmm-hmmm just hope the other board slang doesn't catch on too much here, some of it is so annoying...pl0x for please and stuff like that

that old memphis belle is ballin bro my.02 is to clean up the back deck when you get a chance, throw some nice grills on the 6bys and mount those tweets somehow, even if its flushed into the deck facing up, it looks like youre just asking to hit a bump and crack your rear window. those look like kicker rca's at a glance, if they are, be careful with the ends, if you bend em too far they tend to just stop working, , i have 2 sets that just dont transmit signal anymore for whatever reason

thanks so much, ygpm when i get home and tear my whip apart to make sure it'll fit

i agree with expo, lol im only on when shes home or im at school, and she doesnt mind cuz that means im on aim and talking to her i dont do it when shes around though, never get the chance

got some good equipment there, so whats the plan so far?

thanks, im a retard and just saw the 6.sumthin ohm nominal series in the t/s specs dual 4's is perfect, but they would be getting close to 1500rms daily apiece dual 2's it would be 1000-1200rms apiece, will they reliably handle the 1500watts (keep in mind i drive 6-12 hours on roadtrips like 10-20 times a year and will be on close to blast most of the way) Can you post up an Outside Diameter for these? its going in my rear deck and theres only like ~16inches depth... sometime before christmas my car is getting gutted for a new build, hopefully with these, and i want to make a mock up to make 100% sure its going to fit, otherwise its going to be 3-12's

my .02, laptops are part of the "shit will always go wrong no matter what" part of electronics get whatever has the best warranty and the specs you want mine was 1500 when i got it (nothing fancy either...no video or sound card per se, all onboard junk), gone to toshiba 2ce in 2 years and this third time im fixing it cuz its out of warranty. hope you enjoy that hp laptop though, post back with how you like it

front dome light fell off, then the mounts cracked and it stripped the screws out so it rattles like no other now. i go through tail lights like every week, my brakelights just go out one after the other broke the mounts for my rear deck brakelight so now its held down with a hat my doors wiggle enough to rub the rubber seal against the paint and wear it down to bare metal no real damage yet thankfully

i'd like 2, i can paypal you cash by first/second week of january (im in school till then basically), preorder still going to be in effect then? what are the chances they like ~3cube boxes with ~12sq inches of port per cube apiece? tuned to like 28/29hz? dual 3ohm?

wow i mean, its ugly as hell, but props for making that stuff work, looks like a wiring nightmare and its gotta grab a shitload of attention, and thats the point of any demo vehicle, to make everyone at the show stop and go"wtf, bro, check this whip out"

thats only the crown power/gti series amps, looks like its the gto1400, and if you have 4 ohms im guessing you have 2 dual 4's? if so, paralell them and run in stereo 2-ohm. crowns peak at 6 ohms btw, something to compliment their dual-3 ohm gti subs but nice setup bro, you got some good stuff to work with and it looks like its slappin already. Look through the subwoofer/enclosure section and get some ideas for a box, what you need, how its constructed, have someone design one for you (or do it yourself if you feel adventurous) and get the nice increase in volume. just remember a box is woodworking, take your sweet ass time even if it means it takes you all week to slap together 9 pieces of wood. It always ends up taking me atleast 6 hours for a basic square ported box with carpet, take your time and do it right.

1 set of jbl p660c, run off of a way turned down gto1004 since july or so, rarely on because that amp also powered the tweeters and they were just plain annoying, I guess maybe 20 hours playtime max. They were both playing in my car yesterday just fine, they were getting in the way in the back seat with the way my pods were, and i have no plans of putting them back in. $100 plus shipping for the pair (no grills, they got kicked and scuffed and junk, which is why i took them out before the got any real damage) pods are $60 plus shipping if youre interested, definitely have to be refinished at this point, fit in the rear carpeted part of a 1995/96 ish avalon door if the carpet is pulled out, just screw in from the back with a half dozen wide head screws. I prefer local pickup if possible, im in Oswego ny until Dec 19, then Suffolk LI till the end of January

i'd vote no t-line, the t/s specs on that sub dont look like the kind that reacts well to the near free air resistance of a t-line, a more traditional ported box is probably your best bet just my .02, you're going to spend more on glue than the sub, why would you really build a custom enclosure for a 40$ sub from a company that does'nt exist anymore? If i knew how to convert t/s into volume and port size i'd help you out, but thats a bit beyond me right now, if anyone has the formulas feel free to share

this has been going around my school for a few weeks everyone is getting boats'n'hoes shirts its getting so played out =( its my roomate's ringtone, ive heard that song hundreds of times now...

think of how a sub moves, in then out...it pushes air in and out, so no air is getting pushed out of the car, its kind of just being pushed a lil way out and then sucked a lil bit back in, hence the can trick

suibo=suicide lambos? thats pretty ill, its something different u know if its just a lambo kit mounted on the other side? prob be ill on on 4 door car, fronts normal, rears like that im digging the 180 degree autoloc kits though, where your door rotates up, vertical, and back down till they almost touch the ground by your front wheels looking at the car you posted, is there even enough room to get in? it looks like you have to duck under from the angle its taken at

i saw that on news 12 today, they said they were pushing the medics off the guy while they were trying to help them or some shit, people are messed up, all for some buy one get one shampoo and 2$ cases of cocacola