Jump to content

Loudsinglecab

Members
  • Posts

    39
  • Joined

  • Last visited

  • Days Won

    4

Everything posted by Loudsinglecab

  1. I would start with the fan wires wrap your ground 3 to 4 times to see if that helps then move on to RCA's.. Just do one step at a time so you know what fixed it, keep us posted bro..
  2. No worries its the RF transmitters you have to worry about hence cb radios ham radios ECT...
  3. Bassahaulic designs aka Drew Jones can get ya straight bro...
  4. Steve Meade has an insane home theater , and Jl doesn't do home audio lol
  5. Well in theory Kicker would know what their subs require , but I assume Gately built this to fit the vehicle ... What car is it in ? is it installed yet and how does it sound?
  6. Isolators are worthless unless you plan on leaving the engine off while bumping.. I run 4/0 + and - front to back in my S10 for a four 15 setup and it is a SQL setup with zero alt whine ECT.. If you know what you are doing you do not have issues .. My best advice is be careful who you get your advice from lol
  7. I dont just park and pound lol but i have a Prv 120 amp power supply mounted in my truck for tuning ect... Which is perfect holds 14.4 driveway bumping .. I dont full tilt while on plugged up its neighbor hood friendly lol .. I assume the OP would be riding in his daily driver while bumping of your burning gas you might as well be riding IMO ... He asked for a solution so i gave him one 🤷
  8. It would be best to go with the specs the subs...
  9. A lot of folks gonna bash me for saying this but for what you are running just get a prefab box tuned 32.. I would suggest not mounting the amp to it because of possible box flex from a prefab.. Now I do have all my amps mounted on my 4th order box but it's three layers thick all the way around lol Keep us posted bro ...
  10. Run a lithium batt in the back just for the stereo system and charge off the alt under the truck so it is completely seperate from the trucks electrical ...
  11. https://www.jegs.com/i/Powermaster/713/8-410/10002/-1?gad_source=1&gad_campaignid=19683220447&gbraid=0AAAAAD6OBRGMhF6naxWTBzMQGANyuEYHa&gclid=Cj0KCQiA_8TJBhDNARIsAPX5qxQOwn44GUuOfqDjf8ABRc_9jjgjYR_4qjnl-DSIYnTb1_YHMF1jtTYaAnD8EALw_wcB
  12. Mount an alt under the truck belt driven off the drive shaft like they have done on sand dune trucks ECT ...
  13. I run two NVX 6 ch dsp's they are $150 each I run two 4 ch amps and a two ch and two mono blocks amps for a 12 chs total.. 4 ch for tweets a 4 ch for kicks and center ch and a 2 ch for door mids and two sub chs. Simply replacing speakers as someone mentioned will not get you the surround clarity you are looking for I myself like to hear every last note and detail of the music.. It is like being center stage at a concert, you are on the right path bro keep us posted please...
  14. Stays pretty dead in here ....

    1. boom50cal

      boom50cal

      8 years ago this place was a riot dude...

       

    2. Loudsinglecab

      Loudsinglecab

      Yeah I was just lurking around in here back then lol

       

  15. I don't have a hell cat but I have been in a similar situation with my S10 .. I hacked mine and used pods for a while and then scraped that after a year or so. I had a buddy of mine make me a custom set of panels for four 6.5s and tweets wrapped in black leather .. My doors were around $2500 panels amp and speakers but was well worth it and looks and sounds bad ass ..
  16. Why did you add a 2nd batt for that lil amp to begin with bro? I would clean up the wiring just take your time and you will get it right...
  17. I have a four 15 blow through in my single cab S10 and love it bro, I have a Basshaulic fourth design for 2x15 and a 4x15 I will be glad to give ya if that would help ya.. They will be free if ya interested bro...
  18. I should have done a home theater instead of the truck .... 😳
×
×
  • Create New...