Bigg Boy

if you want to go all out I would say about a 100sq ft should cover most of it

Yes you need 3 kits for that you want to do

Payment pending on the eq

Kenwood Excelon KDC-X692 For Specs Kenwood Excelon KDC-X692 MP3 CD Players - In-Dash Receivers at Onlinecarstereo.com Asking $115 obo prewired for the magnum (if you want, will work with alot of new mopars) Its in perfect condition Clarion Clarion EQS746 Has seen better day, but sound great, only thing wrong is some of the led's have burnt out Asking $30 Ill do the both items for $135 All prices are + shipping, and + paypal fees

Yea its normally about $45 for me to ship boxe 2 12" boxes when I build them

Could do the same if your closer to me

My idea right now is to run 4 Zaph Audio ZA14W08, along with 2 Vifa DQ25SC16-04 per front door. They would be ran active and with a crossover point around 2.5khz I would be running these in a "IB" configuration. I was told not to run them in sealed pods because it will greatly reduce the output, and would give it a much higher roll off on the low end. I choice these drivers because a friend of mine built a set of monitors for himself with these drivers and I was blown away once I heard what the prices on the drivers where. Another reason I choice these drivers is because once again I am a college student and don't have a huge source of income at the time. I set a budget of $400 for the components, and this set-up I have in mind falls just short of that. The reason for so many drivers is I want some thing that sound great with proper imaging, but also can get loud enough to hear what song I am playing when I crack my bass up. Now my questions are: For what I am looking to do, do you guys have any suggestions? whether it be to go with different drivers, or just little tips and tricks. Also for tweeters placement I know your supposed to run the tweeters as close as you can to your other drivers to reduce the amount of phase caused by the delayed signals. But I have the ability to time delay my tweeters separately from my mids. So would it be a good idea to place the tweeters higher on the door, to attempt to "raise" my sound stage and correct the distance issue with delays? Thanks for you time

I have a feeling these are "5500w" amps aka a bamf or something

You set your idle to 2k? Your joking right?

Before After

qu1cks1lver56 how is the interface on the 9887

Whats the difference between the 880 and 800.

ehhh I have this thing against pioneer, its a long story. Eq's wont be too big of a deal, the 5 band parametric eq will work fine sense I will have 5 bands for my tweeters, and mids

What would you guys suggest for running a active 2 way setup, and the deck must have time alignment My Idea's are Alpine 9887 eclipse 7200 mkii Any one have any other options I am leaning toward the 9887

Flaco who are you? Last thing we need is ever more hate on NY

Class a/b?

I have had that clarion sense it came out. All the led's but one have gone, but it still sounds great

Don't do different subs, keep it all one size

When does it drop that bad? At idle?

what voice coil configs are the woofers

I would do a fuse, a breaker can fail, much less chance of a fuse failing

That amp should be plenty to get that woofer going

Looks good man, looks strong as hell, little messy, but should pound

Just put all 4 in the wall

Denon Hp-1000's only head phones that stand up to studio abuse everyday.