CR Boom

WHAT?

price on subs????

Congrats man...

It won't be with box rise.... also I also noticed bigger port area =less rise

motor tranny with LSD /// Victim is a 89 B-12 /// what is funny motor transplant and nitrous, realistic times high 12's to low 13's... Would of not even bothered with something this slow before, but times change....

I also want to know why you can't use this amp daily...

Fucking beutifulllllllllll

Don't expect it to run 1/2 ohm.... just make sure it has the power you want at one ohm.. and it is a 14k so it should have the power...

3 amps will cost more $$, but I believe it is the better option... less rise etc,etc,etc...

Just a few pic's. Heavy mother..... Big hole, Next gen bass head.. Next ex wife...lol...

I use the port calculater on carstereo .com,, Here is some info from there. I can only find pvc in 6 meter lengths, mega dam $$$$ when I need under 20 inches.. so I'm going to stay slot with this box.. square inches of port, for four of my woofa's 31hz @ 149 in^2 long 15.2inch 33hz @ 159 in^2 35hz @ 168 in^2 37hz @ 178 in^2 long 3.51inch But here is the thing, these numbers are way over our normal " per cubic ft req.... Going on a bit of a rant, but I,am going to due some serious testing this next week with a one woofer box, with different cubic feet, port volumes, port freq's Hopefully this will help some one out, so there head isn't spinning like mine...

Update had some water damage,,, so it finally made my lazy ass tear out my box.... This box did a 147.6 at 2ohm,, and a 148.3 @ 1/2 burp... Pictures are of the glass braces, and pretty leds to ligt up the inside of the box. Out with the old, no lights and wires,, got rid of the wood braces, it has to help I hope... Going to add 45's to every corner also, remeasured box, after subs and port 10.16 ft and ported @ 30.25 HZ, inside of port 5 X 28.5 @ 17 total length

Looks good man.....

Thanks guys, we have to go thru vehicle inspection every year here and I had to put my seat belts back in the rear seat so I figured what the hell.... All that bitching I was doing, just sved me a couple G's...lol...

Some pictures of a little water damage... This is how the story goes, I used i tube to transfer power and speaker wires between the cab and the inside of the bed in my blow thru, I got a 4 inch hole saw, that is actually 3.3/4.. so I sectioned a 1/'4 inch out of the pvc tube and made it work.. Well yesterday we had major rains. today I checked, have to remove the rear seat and holy shit problems,,, caused no electronic damage luckily.... Moral of the story don't be lazy, do the shit correct,,,,, don't short cut...

I would suggest un hook them, so you don't mess up your amp....

.... wow ......

Yes that will work with a maxx link,,, but you will only be giving each sub around 1400-1600 rms... I can't remeber if you can strap those...

Re -mx's Thanks guys from what I have heard, I will scratch this box, Thanks for saving me some time and cash....

Yes a modified "wicked one" Has anyone built a "wicked one" yet???

yes 4th order, this is supposed to be a 4th order horn, I'm trying looking for something to hit flat between 40-60

... lol....

Bump before I waste $300.00 on supplies..

QES 0.503 Qms 3.206 Qts 0.434 FS 23.165 VAS 59 liters Xmas 22mm SD 480cm^2 Bl 14.56 Displacement 0.19 cu ft.

.750 walls....