fox_racin4

ill be reviring to 1.4 strapped tonight.. gunna take a while to rewire.. again! haha

The amps just go into protect at like...1/2-3/4 volume, i pit my old pioneer back in and its bettter, still protects tho, Before i put kenwood in, i was running pioneer (the one thats bck I now) and it would never go into protect...and i was beeaating on it pretty good! and now, after running kenwood it seems to go into protect , hen it never used to. this weekend im going to rewie to 1.4ohm and then i should be golden, and possibly even try .45 per amp UNstrapped, jacob said sometimes the amps dont like to be strapped

Decks a kdc bt948hd

Ok, so my setup consists of 2saz 4500s, Little rundown of issues had a pioneer deck, saz4500s at .9strapped (yes..i have decent electrical..) pionner faceplate got uber loose from flex and liked to shut display off and kill tunes but rmote lead still had power (amps stayed on) Go buy myself a new kenwood kdc got it all playing, go to test and amps go into protect... never protected with pioneer deck ... Rewired to 3ohm and no more protect but..its not nearly as loud as it was. Also this knwood deck seems like it stops sendiNg RCA voltage afte a.certian point ...not quite sure how to explain it bassically what im asking is, why would changing a deck make and go Into protect? When at 1ohm couldnt even get 3/4 volume..

SRT4 swap!

IMO it is worth buying a router and jasper, ill never use a jig saw to cut holes again.

moar gain!!! the DMM gain setting works.. but isnt 100%

already got.. for a killer deal you wernt suposed to see this thread.. kep this hush hush till next weekend lol

Remember a high tunned BP4 will usually still play lows, therr tuned higherthena normal ported box try turning gain up a tad more the way you set it isnt the best... thats how i do it aswel and usually turn it up a few clicks past were i set it

Electrical consists of, 425a MM alt 3pos. runs 3neg. runs and to start 2 2150s charging at 15.2 amps [email protected] and 2 sax125.2

So 2 should be ok on a saz4500 425a alt

Bumppp

Whats.your guys oppinions on the oddesey 2150s?

I used to....but my truck was a daily driver so if i broke... i had to hurry and fix, started getting expensive so i stopped lol

Theres a bolt way up in the pully, once thats out it should come off, but they are usually on there real good, get a pully puller or cut it off (cutting wheel on grinder,. then cut to crank, split it open with a punch)

www.heymow.com EVERYTHING you neef, is there i used to race them, just im on my phone so it takes a while to type

A tline will be massive for 2 12s stick to ported

If thats your friends daily driver....tell him hes a retard.

Voltage stayed mid 13s clip light was going crazy subs heated up in about 30seconds Tried everything to minimize clipping... nothing seemed to help... like i said...my opinion

IMHO SD12k for DAILY not a good option.... ask boilermaker about them My experiance with an SD8k.... my aq3500.1 was louder, sounded better,

????

Didnt even think of that! thats what i will be doing. after i fix the one stripped terminal And to mrskippy.....im not wasting any money, ive got 20f of 4g colecting dust...could have used it.

Planning for mid 50s under 40hz last setup was just a normal ported box, im rebuilding.... full wall more power

Nope...that was only with 8 10s on maybe 4k, doing a 148ish.... need moar!

Already "broke" the rear window out of the frame... fixed that prblem tho.