theTank77

As someone who builds mud trucks I'd say go with BDS or SkyJacker. Both are good brands. A 6in lift is a little excessive if you're only going to put 35's on there. Those stock tires are already 32-33's. With a 6in you could fit some 38's if you want to go bigger. I recommend Goodyear Wrangler Duratracks for tires. The are the best on/off road all terrain all season all everything tire I've ever used. Here's a couple trucks I helped build. http://i.imgur.com/YVmCqZG.jpg, http://i.imgur.com/IWIPafE.jpg, http://i.imgur.com/TY9whFD.jpg, http://i.imgur.com/6F17XCe.jpg, http://i.imgur.com/5MzlQ28.jpg . That last one wasn't a mud truck just a chevy with a 6in lift and some 37's. and yes that is an RX7 sitting on a chevy frame with a big block chevy and 38's lol. Also if you want to pick up some extra power in your new f150. I read that an new exhaust alone can gain you almost 60-80hp if you have the money to get one.

Its a motherboard for and old PSX, the original PS1. I gutted mine not too long ago and to clean everyhing.

Hey man you should paint the intercooler black. It really helps out for heat dissipation. Check out this vid It's by Mighy Car Mods. I've been watching them for years now.

get the 7870. it wouldn't be beneficial to get a second card and run sli with your motherboard. your pci slots run 16x 4x so your second card would just get choked out and would end up actually slowing down your video cards.

all of this except i would get the Corsair H80 not the 60. the H60 only has a 25mm thick radiator and doesn't cool all that well. You're better off with a good air cooler than the H60. The H80 has a 38mm thick radiator. It is a lot better for cooling. Also I would get this case instead Cougar Evolution because that BItfenix case doesn't have as good of cooling. Also its the same price and the Cougar is a full tower case.

better quality or more deadener

umm... cause i actually use tools in my tool box, i have the factory jack, my craftsman set, ropes, straps, etc. It is FULL. not to mention i dont want to put holes in my tool box. edit: batteries are 9in tall, 13in long, and 7.5in wide understandable. I actually used mine too before i put in my rollbar. i found this battery box but its a half inch taller than what you can fit. thats the only one I've found that is close without just building your own.

why not just put the batteries in your tool box?

They are under the box and amps where the spare tire used to be

i would go with 18s.

take it apart and look at the soldering on the back of the pcb. look for any shorts. worst case you have to buy a new amp. if there is any solder touching somewhere or any shorts you can probably salvage it. if its still getting hot you can cut a couple holes in the top plexy and buy a couple slim profile 120mm computer fans for extra airflow over the parts

Being an asshole is a good way to get temp banned

cheap walmart battery should work... LOL. go for an XS power battery or a Kenetic. go to their sites. they have the dementions of the batteries on their sites so if you go out and measure your battery you can match them up that way.