badasschevy

rf t10001bd will push it nicely.

he already has one http://www.stevemeadedesigns.com/board/ind...showtopic=25061and for the pallet situation just send Anna around in the ss at night going around the warehouses in your area grabbing pallets that were left out. looks like the warehouse is coming together.

i'd check your firing order 1-8-4-3-6-5-7-2. make sure you have the wires on the cap right. http://www.hotrodders.com/forum/attachment...achmentid=17192

did you remove the right line? you'll have 2 lines going into the throttle body, the smaller diameter is a return line, the bigger one is your pressure line undo that one and see if you have fuel coming out. the fuel line could be plugged aswell.

how are the plug wires, distributor cap, and rotor? could also be a bad coil.

i would say its the cluster aswell, my wifes 04 with 31k on it was doing something similar and was replaced under warranty. the 03,04, chevy and gm trucks are known for the guage cluster problems. heres some info from another site. 03-04 GMT800 07187 - Special Coverage Adjustment/Instrument Cluster -------------------------------------------------------------------------------- GM PARTS BULLETINS & INFORMATION - TO CADILLAC, CHEVROLET AND GMC DEALERS Subject:Bulletin GMP07-174 - Special Coverage Adjustment #07187– Instrument Panel Cluster Gauge Needle FunctionMessage #:VSU20071575 DESCRIPTION: SPECIAL COVERAGE Adjustment #07187– SEPTEMBER 28, 2007 DUE TO PART AVAILABILITY, THIS SPECIAL COVERAGE IS BEING ADMINISTERED IN PHASES. YOU WILL BE NOTIFIED AS EACH ADDITIONAL PHASE IS RELEASED. CUSTOMERS ARE BEING INSTRUCTED TO CONTACT THE DEALERSHIP TO ARRANGE AN APPOINTMENT IF THEY BELIEVE THEIR VEHICLE HAS THIS CONDITION. THE CUSTOMER IS BEING ASKED TO PROVIDE THE VIN SO THE IPC CAN BE ORDERED IN ADVANCE OF THE SCHEDULED APPOINTMENT. THIS WILL ELIMINATE THE NEED TO KEEP THE VEHICLE OVERNIGHT. Some customers of 2003-2004 model year Cadillac Escalade, Escalade ESV, and Escalade EXT; Chevrolet Avalanche, Silverado, Suburban, and Tahoe; and GMC Sierra, Yukon, and Yukon XL vehicles have reported that the instrument panel (IP) cluster gauges stick, flutter, or become inoperative. This may cause inaccurate readings, including the speedometer and fuel gauge. This special coverage covers the condition described above for a period of 7 years or 70,000 miles (110,000 km), whichever occurs first, from the date the vehicle was originally placed in service, regardless of ownership. Refer to Special Coverage Adjustment #07187 for further information EFFECTIVE DATE: Initial owner mailing is scheduled to begin: Phase 1 9-28-07 GENERAL INFORMATION: Instrument panel clusters (IPC) required to complete this special coverage are to be obtained from the Electronic Service Centers. Refer to GM Service Policies and Procedures Manual, section 1.5.9, for specific procedures. To eliminate keeping the customer's vehicle overnight, customers are being told to contact the dealership to arrange a service appointment and to supply their VIN. Dealers are to pre-order the IPC identifying the part from the Electronic Parts Catalog using the VIN filter so it will be at the dealership on the day of the scheduled appointment. 1. The customer will contact the dealership to arrange an appointment and provide their VIN. 2. Contact a GM Authorized Electronic Service Center to order an exchange and arrange for delivery of the pre-exchange product. 3. All units will be shipped FedEx Ground. 4. After removal of the defective unit, return the defective core to the Electronic Service Center using the supplied pre-paid Automatic Return shipping (ARS) label. 5. Failure to return the product within 30 days to the Electronic Service Center will result in a charge to the Dealer's Open Parts Account.

i had some claws on my old 78 chevy, they were very quite for what they were and rode great and now a friend is running the same set on his jeep. i heard good things about the atz's and mtz's about being a good all around tire. just most places i found them were priced pretty high. that last link i gave you is probally the cheapest you'll find them.

also check out the mickey thompson atz's and mtz's, i'm thinking about going with either one of these for my next set on my 98. http://www.tirepackage.com/subcategory.asp...&subCat=161 also another site i found. http://www.onlinetires.com/

check out summit racing http://store.summitracing.com/egnsearch.as...amp;D=%2D128260

i'm going through the same shit. Fuck that!!!!!!!x2

[quote name='brendyn74' date='Sep 6 2008, 12:05 AM' post='417473' BTW - The box is 5.4 gross with the port in the center - each sub does not have it's own chamber. What's the displacement on the DC level 4 12"? the displacement for the lvl 4 12 is .16

what, no burn out contest? it looks like it could be a cool show. i'll be there.

couple vids

shit, were pretty much neighbors. i'll have vids up in few, you guys know how photobucket is.

thanks man, just one little ol 12 i'll get vids tomorrow. some rock and rap.

ya, i was giving a demo to the new owners of sound solutions at the end. i think i was playing some korn.

i should of let you here it on sunday, but it sounds a lot better. it moves more air, the bass is alot tighter and more accurate.its louder than the last one.

the local shop in town wants $500+ for the dotechs, they have decent mid bass and the tweets arent to bright. i was looking at the hertz hsk165's before i found these.

love the way they sound, and i couldnt pass on the price.

some pics of it installed, and i still need to make trim panels for the amps. it sounds good, and gets decently loud for a single sub setup

i'm running those. i like them alot and arent priced to high.

thanks man, are you off of golden view, pah rah area?

not yet, i just got done wet sanding. still have to make my amp racks,and figure out what i'm going to do with the trim panels. screw it heres some more pics. the equipment: rf t1k dc lvl 4 12 rf t3002 220 amp alt components: morel dotech ovation 6.5's that i got from my brothers wifes dad for $200,in some door pods my friend had laying around. i need to repaint them to match the doors. dont mind the dirty truck it needs a good cleaning. head unit: alpine cda9886 replaced an alpine cda9813 knukoncepts 1/0 klm wire for the rf t1k big 3 already done with stinger 1/0 not pictured onto some of the console build not pictured resin 45's. 5 coats of primer tomorrow i'll have it in the truck, then i can decide what i'll do with the amp racks.

thanks rusty!!!!! dropped off a dc sticker so i could finish the paint on my console. which will house a lvl 4 12. ran off a rf t1k. will post complete build when finished.

do you already have the qlogic pods? if not check these out. http://www.customspeakerpods.com/category.sc?categoryId=35 i have them in my 98 chevy. i'll get you some picks later, the batteries in the camera are dead.