ugpbmx

well I would be comparing the prices for the red tops around here. which is $90.00 with lifetime warrenty. Im not sure what they are going for were he lives.

if the OP can afford XS, then I tottaly agree.

x3 on the yellow top. especially the group 31's. i have used my red top for over two years on my truck. it does great for turning over my big engine lol.

im sure he will post pics when its in. the owner just came and picked it i]up earlier today. port area is 25.12 sq. in. for both, the box is common chamber.

im sure he will post pics when its in. the owner just came and picked it i]up earlier today. port area is 25.12 sq. in.

Shut up lol! lol. I wish I could have tested it on the truck. should sound good for him though.

it came out great man. let me know how it sounds it is 3.8 cubes tuned to 34 hz BTW lol

adding a H/O alt or multiple atls causes the enginee to work harder to keep up RPM's. when you put a load on the alts they put a load on the engine. there is a risistance gain when the alts have a load on them. this happened when I put a second alt on my truck.

check out mechman ,or DC alts. they both are great products. and once you put a load on the alt it will start to make the engine work more to keep up RPM's. thats always going to happen.

yea no problem. once photobucket is back up, feel free to go through my build log. it may help understand some of the things i was saying.

if you seal the boot properly then nothing should ge in our out. the only thing you have to do is seal the box off from the bed totally. get the box as close to the cut out as possible and bolt it down. some people use expanding foam to seal it off from the bed. I used sound deadener to seal my box off. on the outside of the box on the top and sides. then on the inside on the bottom of the box. just any way you can seal it off from the bed.

no problem man. some people cut the hole just big enough fo rthe port to come through when doing a 6th order. with mine I made my cutout pretty much as big as the face of my box. If anything the hole will act as another port that can be tuned. I would post a pic if potobucket wasnt down.

when I did my blow through I just used an angle grinder and cutoff wheels. don't make the corners 90 degrees. do rounded corners so the boot has a good seal. its hard to get it to bend and seal at a 90. Id say just cut the whole as big as you can while still keeping structural integrity. use some epoxy sealer in the joins for a water and air tight seal, and you should be good to go.

More spark means more efficient fuel burn because there is more spark doesn't mean there is more fuel injected to be burned ok yea that makes sense. then it seems like you would waste less gas per spark. im not sure it would be that big of a difference though. I could just mean a more efficient/consistant spark resulting in better gas mileage. But like 95_1500 said you could fry some things.

id like to see how this goes since it is an older vehicle. I would think that you might get a stronger ignition from the coil and a stronger spark to the plugs. but that would make me think you would get worse gas millage because you are useing more gas when getting the bigger spark. if that makes sense its late lol.

I have a term lab, but I am in palm bay. about an hour and a half away from orlando. what do you hit off those 2 level 4s?? well right now they are in a box for four of them. im getting 144.1 at 29hz. im shooting for 150 with all four.

I have a term lab, but I am in palm bay. about an hour and a half away from orlando.

thank you, the grips are animal Edwin Delarosa flange-less version. the only grips that I will ever ride lol

Ive been riding for about 8 years now, I am involved in quite a few competitions around my area. I am also currently in school so I can open my own bike shop Here is my bike let me know if you want to know the parts that are on it, I can name them all and how much they cost lol

lvl4 15's waiting for two more

lol its just a rockford prime amp with a DC sticker on it. But you might see one in there very soon hit me up for pricing!! ok ill tell him to

lol its just a rockford prime amp with a DC sticker on it. But you might see one in there very soon

yea the deisgn worked for him. we need to take it out one more time and do a final sanding. And i think hes going to do a dark stain on it.

lol yea ive been telling him we need to get more pictures and some videos. the box cam out really well. the 6 in aero port worked perfectly.

I know sometimes the battery light will come on with after market alts, because they have a higher charging voltage. Ive read that on a few other posts.