C-Fizzy

Set your gains correctly with an o-scope at 3/4 of the max volume of your HU. In your case, 46.

Whatthefuck.

Your volumes is too high on the HU I'd say. I have mine on 45 out of 62. Your probably still clipping badly Edit: move your ground off of the seat bolt too. That's not a very good place

Hey j00bles, if you end up making your own, let me know. I'd most definately buy a couple from you

Damn bro, congrats!

I honestly don't see why you can't mix them if they have the same coils/stats/everythingelse. If you have any concerns, get ahold of Fi.

I can't answer your question about mixing old and new models, but if it were true, why are you mad at Fi? Shit happens, if you wanna keep the older ssd, then look for another old one for sale.

lvl6 8?? LAWL

Yes. Do a run of positive from front batt to rear batt and ground the rear batt to the frame.

I love the whole plug-and-play port idea. And you sir, have a very sexy woofah gotta love beastly ass small subs.

Shipping to 95758?

Where is your ground at.

Flexibilty helps alot. But I was just saying that the hpm is more flexible than the klmx

I've used knu klmx and stinger hpm, the klmx has a shitload more strands, but then you lose the flexibility. And stinger costs a shitload more. Knu ftw

BOOBIES

Go for the lion

Sorry I had to, Cool story bro.

Ya just get a fan and lift the amp off of where it's mounted maybe an inch or so

Just givin' you a hard time man, I completely understand first set ups. I'm 17 and this is my 2nd system. But are you sure you don't have the amp wired too low?

Some ideas to cool it down? Toss it. First off it's a pos, second, your ohm load is probably too low, that stench you smell it's probably your amp. What's your set up?

Haven't tried the 1510s but I'm soon going to upgrade to a 9515. So to the OP, if you get the 18, let me know how it runs.

I think the 9518 is somewhere near 1g. Might be less tho. But IMHO, it's wayyyyy worth it. The 1508's I have are 200 a piece new, but they SLAM.

Hide them under the box if you have room, but that 260 should do work.

Fuckin sweet. 300 amp alt and 3-4 kinetic hc2400's. If you get those, I doubt you will have minimal if ANY voltage drop.

DD says the 9518 has an 8000 watt max, yet I've seen people run 5500 on it daily. But it's gotta be CLEAN power. I'd say 3100 would be perfect.