Loudcivic

could the few of us get our name changed that have posted above please. thanks

nice vid. i bet it sounds so good to sit in there and just let it pound.

no its not totally stable at 1 ohm. seems like some of them are ok with 1 ohm but your need very good electrical to run it that low. i would only run them at 2 ohms just to be safe

go hard or go home right. lol twisted show us some more man

to the people who are saying that the sub wouldnt last on a aq1200. if the op reads a little he can set the amp to a certain rms with a dmm and not blow it. if your stupid and just crank shit up ya its gonna go up in smoke. if he gets the aq1200 he is better prepared for his future upgrades cuz im sure once he gets the 18 eventually hes gonna want a bigger 18 and he will be ok cuz he will have some power for it

nice but on the first vid it almost looks like the top sub are out of sync with the bottom subs. what amp or amps are you running

wow that was a crazy crash i cant believe he lived

gonna have to go knock the dust off those smd's with a new vid once you feel better lol.

nice looks like a good product and if i remember right its not to expensive like half of wut a tl cost. i wanna get me one of them meters soon maybe tax time

i dont understand why not get a nice head unit before the 4ch amp with usb and nice setting and get rid of the converter box and run your rca;s like there suppose to be. ill guarantee you it will sound way better and you would have to worry about how your gonna run that 4ch off the converter box bullet: ya that would work but i just think he will be losing sound quality

glad your home man take it easy kick back and watch some tv lol. when can you eat normal food again? edit: post 420 woot

looks like the shit hits hard man. nice

i would go 20%. i have 20 on mine and i can see out the window at night time just fine

let us know your budget and what your electrical is and we can help ya. welcome to the forums

yes it can make a pop sound if the joint is that bad but you would hear the loud noise all the time while driving if its that bad or when turning. also the pop sound could be(like i said before with the caliper sticking) the brake pads letting loose with some pressure on it cuz of the sticking caliper

once again a bent axle will have no affect on it pulling. a bad wheel bearing will though. if you wheel bearing is bad it can change your chamber and alignment therefore making it pull. if the wheel bearing was bad though the shop you had your alignment at should have noticed that because they wont do an alignment on a car that has something going bad or already bad for the reason of liability

have you ever checked out your brake caliper. you could have a piston in the caliper sticking and not fully going back in which is making a drag on the rotor therefore making it pull. go for a 15 min ride and go touch the front passenger rim to see how hot it is compared to the front driverside rim edit: bent axle or bad cv joint wont make it pull. it will just make a vibration with a bent axle. with a bad cv joint it will make noise when you turn one way depending how bad it is and will eventually break. the bent axle will eventually take out your wheel bearing.

anywhere from 35-38hz should sound good with recommended cubed box

shim it out so its tight and no movement i used index cards(the big ones and had a total of 5 on each side). pick up on the cone so theres enough room to lay a bead of ca down under the spider. then you can put a bead around were the surround goes. then i used an upside down cup on the cone around the coil and put like 20-25 pounds on it and made sure it was sitting good. then i took the accelerator and you just lightly spray it ONLY around the spider. then i took clothes pins and put them around the surround. i didnt use accelerator on the surround and it turned out fine. i will be using maybe a lil accelerator on the dustcap but havent decided since mine was cracked that came with my recone. i did a bead of ca on the outside of the spider and spider landing and one on top of the spider so it tied all the glue in so its nice and strong. thats gonna be a beast of a sub post up some vids

if you didnt know the wheel tubes dont come with it. its an ok kit but you can find better cheap kinda like one that rob posted

nice little setup you did there. good job

ya i would do the sdc's for sure. should be a nice setup

also wut amp do you have

check for a vacuum leak. look for split or broken hoses around the top of the engine were the intake hooks up to the motor. a noise like that is usually a vacuum leak. possibly could be a bearing going bad to. take a video of it and put it up on youtube and post it here so we can hear the noise if possible

the 2 15" aq sdc2.5s is my vote. screw the kickers and the hdc3 is less cone area than the 2 sdc's