sqsux

alarm should come with an installation manual, visit the12volt.com for you vehicles specific wiring chart. the most basic things to get the alarm working are 12 volt constants and a 12 volt accessory. the constant will keep the alarm on and arm it after a certain amount of time. the accessory will keep it from arming while the car is on. these are all usually found near your ignition. parking lights, interior lights, trunk, hood, and door pins are all "extras" but most definitely needed to use your alarm to the fullest. these things are also where the alarm gets tricky.

obvious.

don't know if this thread gets attention anymore but SqSux Springfield IL Dual sensor TL DMM & Clamps if those are being listed as well...

working myself to death to get the mazda running, so i'll be there...

alex's hairtrick is the 7th video... mine is in there somewhere too. just got home and still have glass in my socks, f mike.

So pull out the XLs and install a couple funky pups. Subwoofers are subwoofers, right? buy them for me and i'll do it... not even close. softparts and motor topology arent even close sorry james i was being a smart ass, comment was sarcastic.

subwoofers are subwoofers

might try some wax remover/degreaser from a body shop.

i put ~3 to 5k on freshly a reconed XL with no problem... f break in

i've talked to shop owners and such about it, seem to always say going to a real college for electronics is more impressive.

springfield/champaign

ouch. if i had photoshop on this computer i'd actually attempt to do it for you lol.

i like it personally.

ready for teh quiet

nice vids man, you coming down to springfield with everybody on the 13th next month?

the pac LC1 is by far the best bass knob i've ever used, better than any of the knobs that comes with amps.

i'd say the smaller car will be louder almost no matter what with that similar of a set up.

pretty sure. but on another note, the good sub that came in took the dc 2.0k @ 1 ohm free airing real good but i have to build another fucking box either sunday or monday (cant do it tomorrow because it's my 18th birthday and i'd end up drilling a hole through my finger.) I did that once lol, got me four stitches. sorry about your sub man.

LOL, USACi is the only organization we really have in central illinois, although meca is getting bigger down here. but I know you guys don't have it up north. second one is all on facebook, look up sound mekanix

http://www.soundoff.org/events.htm http://www.soundmekanix.com/2007Website/Frames/allpage2007new.html http://www.mecacaraudio.com/dnn50/Events/MECAEventShowSchedule.aspx

cant i just connect the stock batt up front to a xs or kinetic in the back? yes, some people like replacing the stock battery before adding batts for a reason i don't know. I ran a 2200 on stock electrical + an HC600 for a long time, not sure how the voltage was.

stencil it onto wood, cut it out, sand/route it till it looks good, glue it to the box, carpet. i've never done it but thats how i would attempt.

got to sit in that a few times at slamology, one of my favorite installs ever.

if backseats fold up and are still fully usable then it's a trunk car in USACi.