Jump to content

RickyFriery97

UBL Approved Group
 View Profile  See their activity

  • Posts

    5143

  • Joined

  • Last visited

  • Days Won

    1

 Content Type 

Everything posted by RickyFriery97

  1. RickyFriery97
    Yes 12-16 I prefer a Lil more 15-18 square inches per If you give me Your max Dimensions I can throw something together real Quick if you want
  2. RickyFriery97
    One big ported box>two separate ported boxes
  3. RickyFriery97
    Use Torres box calc from this forum The re calc. Is not spot on Torres is alot easier to use also
  4. RickyFriery97

    new pics in my tahoe build log!

  5. RickyFriery97
    have you tried holding the top button and home button together to reset it? id take it to the apple store and get it checked out..
  6. RickyFriery97
    So you have room for subs back port back but not subs up port back..?
  7. RickyFriery97
    do either subs up port back or subs back port back
  8. RickyFriery97
    depends on the vehicle also.. what car is this in??
  9. RickyFriery97
    Maybe it was a bad knob Maybe you could Order a new knob
  10. RickyFriery97
    really?? my AQ2200D clip light was pretty acurate i wanna get a 3.5k so if i do ill do a side by side test with my tpi scope plus 440 one day..
  11. RickyFriery97
    Alright thank you Can you tell me how you came up with the 4"? I just laid out the box and found the needed port length by going down the middle of the port and accounting for the 45° end correction. well i ended up doing 6.25" on the second peice so i guess its a lil longer and lowered my NET and tuning but not much at all
  12. RickyFriery97
    shoutout to houston texas! im in league city so i aint far from h town downloading now ill make a vid with it jammin on my 18" in my hoe when i finish getting it installed
  13. RickyFriery97
    i was there for a show before =]. kool shop & employees . NOBODY else in texas?... REALLY???... im in texas! RickyFriery97 Texas League city,77573 TPI Scope Plus 440 I charge a few bucks to scope a system
  14. RickyFriery97
    this is the box design i need to have the 6.45 cubes after all disp. i need the exact measurement that second peice should be so it dosent affect my airspace/tuning im not at the house so i cant measure it out
  15. RickyFriery97
    this is incorrect the port has to be the same width all the way back or the tuning will be all worng ok so if his port is 7" wide then he would want the board to be 7" from the back of the box? If so then I built mine wrong and will have lower tuning than 33 hrtz if your port is not then same width all the way back then it is wrong now saying you have lower/higher tuning i have no clue..
  16. RickyFriery97
    ^ this I'm awaiting a XL 18" That 12k is sexy! I just want a 3.5k or a 5k lol
  17. RickyFriery97
    How much are you wanting to spend?
  18. RickyFriery97
    Alright thank you Can you tell me how you came up with the 4"?
  19. RickyFriery97
    Looks nice
  20. RickyFriery97
    this is incorrect the port has to be the same width all the way back or the tuning will be all worng
  21. RickyFriery97
    Pics or ! also there is a "tunez" section hit up decafs pinned thread and the is 23 zips of slowed and boosted music and lots of good low music
  22. RickyFriery97
    i was going to pm you about this but i decided to just make a thread thats what i thought too my my buddy that works at the local mobile one (hes been in the car audio game a longggggg time) he was saying something about measuring from the center of the port to get the overall length but then the second peice from his measurements ended up being way shorter but i think 15.25 is right
  23. RickyFriery97
    Alright on my new box im building the specs of the port are (inner dimensions) 15.5 tall, 7.5 wide, and 32 long the depth of the box is 25", so it needs to turn my question is how long should the second peice be to give me the 32 overall length? The peice with the black lines on t is 16.75 and that is including the .75 from the front wall How long does the second peice need to be??
  24. RickyFriery97
    I'm in league city near Houston but take him to texas showdown in june the shows called heatwave look it up I'll be there
  25. RickyFriery97
    Really?? I'll look into that Yeaa 2 inches seems close I'll prolly do like you said 6-8 inches and I'm using 2" screws
×
×
  • Create New...