loudernu

2 9k's to 29445 please!

It is birch plywood, which is stronger and lighter than MDF. Anyone will tell you that birch is better than MDF, I don't care if it's 7 ply, 9 ply, or 13 ply. You will be good.

Let us know how they sound, I got 8 of the 6.5's coming!

Happy New Years, SMD!!!

Well, the time has come for the new build in my Avalanche. I will get some pics up later on, but here is a rundown of whatis going in the truck. 2002 Chevy Avalanche, Sunset Orange Metallic on 24's JVC Headunit front stage is 8 Crescendo CTS-1 tweeters in the A pillars, made by Epicenter Designs and 8 Selenium 6wp4 in the front doors done by Epicenter Designs Tweeter amp is a Crescendo Audio 1000c4 Mids amp is a Crescendo Audio 1600.2 Processing will be done by a Rockford Fosgate 3sixty.2 Subs are 2 RE Audio MT 15 inch subs, dual 1.4 ohm coils. These will be fed by a SounDigital SD16kd, at 5.6 ohms daily, and 1.4 for competitions. Box will be a ported enclosure tuned to 30-31 Hz dailt, and 45 Hz for comps. Box is birch made, with port plug, and about 9 cubes after displacements. Electrical is Shok wiring, with RCA's and a DC Power 270xp dual alt kit charging 4(soon to be 10) RPS 110 Ah batts. Subs will be reconed sooned with DC Level 5 recones, until the new Level 5's come out, and will be switching to them then. Goal is a 150 on music, and major hair tricks. Any comments, suggestions, recommendations, are appreciated. Can't wait to get my panels back from Epicenter and get this tine done!

2 level 5 15's with options to handle a SD16kd in a small ported box to 29445, please.

you mean like this? sorry, my silver sharpie pen isnt very sharp - ran out of room writing your name haha... You are the MAN, Steve! Appreciate bro!

Done! :-)

Ordering a "signed one too ;-)" to Jason Hunt aka loudernu, right now!

I was watching the news on the ship, we were in the ship yards. Myself and about 20 other security guys had to arm up with M-16s and 9mm's and patrol topside. I walked and watched, and waited for anything, something else to happen, not knowing where or when it could come. We stood that watch for 36 straight hours, until we were to exhausted to carry our rifles, and the threat diminished some. That day will forever be burned into my brain, and that's why I still do this job.

I was watching the news on the sh

Not yet, getting the lumber now.

Yeah, port area is killing my cubic feet. How deep should I make the box, for 2 15's, and still keep 30hz, and 8 cubes after sub/port displacement?

My box is: 19" tall 49" wide 20" deep My port opening is: 17.5" tall 6" wide I am trying to tune to 30hz, but cant figure out the proper port length, this port is in between the subs, so it will bend both ways at the back of the box. Someone please help!

Thought I had a good deal on a used one, but the seller backed out after I sent the money, because his kids had messed it up. Got refunded, but still needing one ASAP. PM me if you got one for sale.