hdorre

Which setup would hit the lows harder? I'm looking for a "ground pounder." 1) Two 15" fully loaded Fi BTLs in a 9.5 cubic foot enclosure tuned to about 32Hz with one Rockford Fosgate T2500-1bd per sub (wired down to 1 ohm) 2) Two 18" fully loaded Fi BTLs in a 10 cubic foot enclosure tuned to about 32Hz with one Rockford Fosgate T2500-1bd per sub (wired down to one ohm) ------------------------------------------------ I know the 18s would have more cone area; but the 15s are in a better sized enclosure because the reccomended size for the 15 is 3-5 cubic feet while for the 18, it's 5-10 cubes.

I only like about three of his songs but the songs I do like are really good

Isn't the extra power suppossed to make up for the small enclosure? Would it sound similar to two btls in 7 cubes with 2000 watts?

How about if I gave each BTL a Fosgate T2500-1bd? Which would hit lower

Im pretty sure that the ground should be as short as possible..like under 18 inches

Any 4 ohm speakers

you need cable for a second battery. But to answer your question, I'd add the cable (big 3) because it's generally cheaper

The fuse size should be ATLEAST the same size as the fuse on your amp

The sun came out really nice! I like the position of ur sons name is right below it

nice install, looks pretty clean

Yea, im having two main problems with my env-touch: 1) I cant open my web browser sometimes because it says my phone doesnt have enough memory which is odd because you cant run anything in the background. 2) The phone resets all the display and touch settings

that happened to my cousin a while ago. I can't believe I didn't think of that

That diagram didnt make any sense to me. So are you saying that you have two pairs of RCAs. One set is too big and the other set won't carry the signal?

I'd try RCAs from a different company cuz the ones you have could be cheaped and ripped inside the rubber (rare, but possible). Fosgate must have good rcas considering all of steves cable is from Rockford

New RCAs from a different company. The rcas that don't work are probably for ur subs. Check your deck for settings on the sub. I know that some alpines have an option to turn on and off the subs. Some alpines also have a control that controls sub level

Lovin that paint in the sun..looks good. Are those grilles new?

iTunes said the same thing when I updated to 3.1. You just need to try again later

I'd put it in recovery mode (turning off, and pluging into iTunes while holding the home button after its off) restore it. If that doesn't fix the problem, bring it back to iTunes and noone will know it's been jailbroken

my dad had his fosgate amp mounted on his enclosure without problems but his setup was weak. What kind of car do you have, that would help answer your question.

Idk what kinda car or enclosure you have but maybe the enclosure? Or under the seat (like Steve, that way it won't fall)

Thanks, shit looks pretty advanced and detailed which i like..its the price thats keeping me away. haha

I guess I took that the wrong way. What calculator did you use to figure out the tuning

Chill out, no need to be a dick..it was just a question

I used the exosport calculator and it said 2.1 cubes at 32hz. I knew the internal volume was wrong because I multiplied all the dimensions and divided by 1728 and it was about 2.9 cubes. What calculator did you use to find the tuning?

Here are the specs on the enclosure All the wood is 3/4 inch MDF Length-17 inches Width- 17 inches Depth- 17.5 inches Here are port specs (3/4 inch MDF) Height-3.25 inches Width- 2 inches Length- 5 inches ---------------------------- What is the port tuned to and what is the internal volume of the enclosure