Jump to content

bassl0va

Members
 View Profile  See their activity

  • Posts

    1921

  • Joined

  • Last visited

 Content Type 

Everything posted by bassl0va

  1. bassl0va
    DC lvl 1 or 2. DD 500b or 1000b series. RE REX series. Fi Q etc etc, there are some sub ideas, couldn't say about amps though
  2. bassl0va
    James speaks the truth. Don't mix the amps, if you have to keep the subs, keep them, but use 1 good amp, not two mis-matched ones. If your on a really tight budget, go for Pioneer, it's many times better than visonik. Try to save up and get good equipment first time though.
  3. bassl0va

    box design is on the thread because it said you can't PM

  4. bassl0va
    Box: Height - 16" Width - 25" Depth - 20" Port: Height- 14" 1/2 Width - 3" Length - 28" (put a 45 at the corner to help the air flow better) If you want you can change the port length to 25" but the tuning will rise to 36hz Any questions, just ask for some reason the PM didn't work?
  5. bassl0va
    Ok, 15" it shall be, as long as you are sure it will fit the sub. Tonight it is then.
  6. bassl0va
    How do you fit a 15"woofer in a 15" box? I still need max dimensions. Even though I won't use the full space. When do you need it by? tonight?
  7. bassl0va
    4" wide by 10" high and then however deep it has to be to tune it to 35hz.' I can design it for you if you give me dimensions.
  8. bassl0va
    yep. It's not that big, 4"s by 10"s.
  9. bassl0va
    If the both have the same port area, it will be the same. unless the round one is a aero port. Maybe just go with a slot port and make sure you have about 14 square inches of port per cube.
  10. bassl0va
    Well there's your problem. The box is far to small. If it is truly tuned to 35hz, it will only have 1 cube. it should have 2.5 or more. If you make the new box 3 cubes you will notice a huge difference, even with the same tuning.
  11. bassl0va
    What sub and amp do you have? How big is the box? A new box should make a huge difference.
  12. bassl0va
    Now this guy knows his stuff! Cookie for you OP in fact it will be louder with the 35hz one, but will not play as low as the 32hz one. I'm sure you would not notice a difference.
  13. bassl0va
    Nah, don't bother with a adjustable port. Just pick the 35hz one. It will be fine
  14. bassl0va
    If you want even lees strain, use a solid state relay, electromechanical draw probably the same amount as a fan!
  15. bassl0va
    It's either the pre-fab box. Or it's a combination that the first note in put on is quite low for a second and might not go well with that box.
  16. bassl0va
    No problem, with my gain at max it doesn't clip (o-scoped). The HU puts out so little voltage because it's 20 years old! lol. Gain is the ratio of increase, so you will be fine.
  17. bassl0va
    ^x2 the wire was probably damaged. The best fix would be new wire though, but if you don't have enough monies, use this method^
  18. bassl0va
    Now you need a button for a burp at your peak! perfect for db drags! lol
  19. bassl0va
    I think there is no proper question, it looks like spam.
  20. bassl0va
    surface area is useful too, but yeah that would be fine probably, unless you have a CRT monitor in the room, it would probably muck one of them up from 20ft away. 1" thick aluminium plate on the baffle so it doesn't pull itself through the wood and fly through some panels
  21. bassl0va
    Tell us how it goes
  22. bassl0va
    Car audio does weird stuff, it could be the wires even though you didn't touch them.
  23. bassl0va
    hmm, just check all your wiring then. Not much else it could be.
  24. bassl0va
    Are you sure they are actually producing a click? If your speakers can't keep up with your subs they can sometimes sound wavery, just from the pressure on your ears.
  25. bassl0va
    Very true. O/P, did you use a calculator? If so, what one? Torres's one is really good cause it has many options and tells you the port area range.
×
×
  • Create New...