o8mustang13

I know that you cannot get into a door if its shaved im just using the signal from the lock to trigger the relay. on my oem the lock is integrated into the same housing as the door latch mechanism and its all sealed inside a plkastic box so i cant completely remove the lock from the door latch

Hey everybody im having some trouble getting the timing right on my shaved door handle kit. I have the relay on the solenoid being controlled by the signal to my lock solenoid as well so i can use my oem key fob. The passenger side is working perfectly fine, but on the drivers side it seems that the door solenoid is pulling before the lock solenoid has fully completed its action causing the lock to delay and not allow the door to open becase it will not allow the lock complete its cycle before the door solenoid. Is there a way that i can delay the door solenoid while still keeping it all controlled off of the lock solenoid signal?

the door panels look clean i like it..props

bump

thanks my first time tinting windows.. curving the back window was a task..

thanks took me about 6 hours with a router and a 18 pack

nobody....... :

alright i got it figured out everybody go check it out...thanks for the assistance

haha yeah im working on that one right now...

alright everybody i just made a photobucket account and did what you all said and in the post it just give you the address it didnt actually upload the phot to where you can just see it here on the forum..

alright so today was a good day i was able to borrow a friends garage and tint my windows and cover a panel for my trunk that i have been working on let me knwo what you think...

alright thanks guys..sorry for such a dumb quesion..

alright how do i get my pictures to upload to here from my myspace page so you all dont have to go there to check them out??

if you have the money to spend i would just go all out.

haha i wish i had ten grand right now..im broke

right on i have all of them the new one is pretty cool. but in defense to the host we all started somewhere remember.

hahah that is for sure..isnt it a great feeling when they take care of you because you drank too much.. they do a wonderful job with that one ladies thank you for dealing with us!!

thats from fast and the furious...

now thats love haha.. to another post the fact that she tolerates your system is always a plus.

haha alright i believe this reply right here would conside me as an alcoholic. I can drink about 3/4 of a handle and still not puke but i really dont walk straight at all. Poisons are vodka, Rum, Wiskey. When it comes to beer my best without puking was a rack on my own. I dont drink every night usually just on friday nights after a long week of work with stupid tourists.

i have no idea lol im about to do my first window tint job on my 08 mustang lol front and side window are flat so those should be ok but the back on e is curved so well see what happens lol........wish me luck

hey everybody can you put aftermarket tint of the factory window tint that come on my car or do i need to remove the factory tint first??

hey i have a RF t1500 bd amp and its rated at 1780 watts and 1 ohm and it works wonders. i need to sell it so if you are interested send me a PM.

thats what i was thinking do you know of a calculator that is coeect that i could use??

i know how to get the area calculated but this calculator that i found online says that i need 299 for the port?? to have it tuned to 30Hz