speedball1978
-
Posts
1818 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Media Demo
Store
Collections
Videos
Everything posted by speedball1978
-
ok first thing, you can't wire 3 subs down to .5 ohms , its either .67 ohms or 1.3... what coil are the subs??
-
its all bout trial and error
-
ya if you use a rounded edge at the end of the port and do a 45 on the opposite .. you should be ok
-
actually more like 5 .. oops.. but it should do the trick.. if you're gonna require a 6 inch port.. then go with smaller subs bro.. otherwise good luck
-
thats the design i got.. 6 in port in the front with the subs...
-
try again
-
lmao!!! same design different spec.. wtf dude, get the port on the same side of the subs...
-
and do you have the crew cab or regular extended cab??
-
ok is that width from end of seat to other seat or door to door?? and are there any humps in the middle for me to watch out for??
-
now that's some cheap wire man, looks like i'll be getting my 4/0 there.. lol
-
lol i know exactly where you are man.. thats not far at all from where i'm at.. i pass the area up twice a day lol
-
nevermind i failed at reading his size, it shows 6.8 after and 7.x before.. lol
-
box is actually 8.36 cu ft before any displacement and 6.20 after so he's in range on the measuremeant.. i dunno how the hell he came up with 16 cu. ft lol
-
i checked on sketch up you can fit the subs and a port all on one side and get low on tuning if you build it right
-
don't do the triangle port and yes you can lose about 1 cu ft.. it won't hurt it.. 16 cu ft is alot for 2 15's , you should only need 6.5 to 10 cu ft after displacement... and besides you didn't give us your height
-
man i want a few of these to test out...
-
where in houston did this happen??
-
ok still then the subs facing the trunk and port firing into the cabin?? make it all facing the cabin area and seal it off man.. you're gonna have issues with a box built like that ..
-
he's gonna have unloading issues, i dunno why he would want the subs to face the cabin and the port to fire into the trunk.. he would have no bass at all.. to me that box would be junk, but if it was a suv.. then ya it might work.. but i have my doubts.. i've explained this to him last week.. and he's still sticking to the same drawing...
-
Pricing Question
speedball1978 replied to ionsmartparts's topic in DC Sound Lab - Big Bass on ANOTHER LEVEL!
butthead, i tried emailing you, and your inbox was full lol when do i get my response?? -
yes and no
-
measure the height under the seat in the far back, and in front, then the width and the depth from the front of the seat to the back wall
-
if i can get dimensions of the space you have, i can see what i can do...
-
i would do 2 10's.. instead