slow240sx

i had an orion h2 sub sitting in my closet for a while. It was perfect working condition when i put it there. When i took it out, the motor was shifted and locked up the voice coil. When i took it apart, i found that the motor was only glued to the frame, and the glue had failed. I dont know if the dc sub is made this way, but if its bolted up, it should be ok.

ill meet up when u figure it out. Im in jupiter/palm beach gardens area

This weekend near West Palm Beach, Florida

looking for a price on a pair of 3.5k amps and price for 1 7.5k amp shipped to 33410. I am in south florida

looking at a pair of the 3.5k amps and a price for a 7.5k amp shipped to 33410 please. Let me know if they are ready to be shipped too please

...sold!

not sure about the sundowns but i had mine on a strapped pair of crescendo bc2000 amps and it worked fine for me on daily use.

I am located in 33410 if u want to figure out the shipping with your preferred way of shipping carrier

I got a dd 9515g d4 subwoofer for sale. Cone and surround in near perfect condition. Dustcap was pushed in so i put a thin layer of resin on it. Sub works perfectly and sounds very nice. $300 plus shipping. I am located in south florida

I am looking to sell my dc audio level 5 18" subwoofer. I bought brand new about 6 months ago and sub is basically still mint condition. No marks or rubs on surround or cone. I still have original shipping box for it. Sub has dual 1 ohm voicecoils. Red dustcap. Sub works perfectly with no problems. $375 plus shipping.

Make sure u get kit for 1 piece rear main seal. Fullsizechevy forum got a lot of info for those trucks. Vortec heads would be nice upgrade but u need different intake manifold then. Just depends how much u want to do. I got an edelbrock tbi intake manifold I'm not using anymore if u interested. If u keep stock heads u can't go much bigger cam without problems so keep that in mind.

can someone pm me a shipped price for a pair of 15's that will run on 1000 to 1500 rms. Need to be dual 4 ohm coils so i can run amp @1 ohm. Maybe some level 3's? Subs need to be in stock and ready to ship cause he is ready to purchase within next few days. Located in south florida

West Palm Beach area here.

got it from a local welding supply store

not that ever noticed. ive only ran it for a couple hours at a time and i can touch it and it feels normal to me

just when i thought nothing was made in the USA i found this...

ya, the dual inputs kind of crappy. I was actually able to get some 1/0 "raptor" power wires to fit in there that somebody gave me. Its actually little smaller than some nice kicker 4 guage that i had. about the tuning...my buddy that designs some bandpass boxes made up the design. I thought it was too low but he said to try it out and c what it does so that is what i will do. I should be able to get that elbow out of the port to raise the tuning if i need to. I not going for db numbers with this build yet. Just a daily setup that should shake the ground a bit. I had the sub in a ported wall with the same amps in my 240sx. I thought it was tuned low 30's but the car actually peaked 147.x @ 27hz and i liked the way it sounded. Definately moved some good air. Sounded good with rap but little boomy with metallica or pantera. Prolly was tuned too low for that type of music.

the sealed side is 2.2 and the ported is a little over 7. Tuning is about 35. Might be a little too low but ill c what it does. I made box with a removable top and bottom panel so i can adjust airspace if need be. Its prolly a little on the big side for now. Gonna be putting a plexiglass window over the sub on the top of box in a few weeks so i can watch the movement to make sure its ok but im still deciding how big to make the panel and where to get it at. a guy quoted me $50 for a 20x20 piece of 3/4 plexi locally

Ive had the boston amp for about 6 months and it seems to be pretty good. Ive ran it at 3 ohm stereo which should be a good 300 or more watts per channel. In this setup im only running 4 ohm stereo so it should be 250 per channel. Seems to sound clean and plays the seleniums loud. I had a 250 x 2 fosgate amp for like 10 years running my mids and it took a crap few months ago. I cant tell any real sound difference except its a little bit louder than the fosgate. I like it, only drawback is the size of it, its pretty long.

The box is all double layer birch wood

So i bought a 1999 GMC Suburban a couple weeks ago. I pulled most of system out of my 240sx and started the burban build. It consists of a DC Audio Level 5 18" in a low tuned 4th order box. Amps are a pair of Crescendo BC2000 strapped @2 ohms. A Boston Acoustics GT-42 will run the front stage @250x2 @4ohms. 2 runs of 2/0 welding wire will feed the bass amps. Selenium 6w4p mids will be in the 4 doors. I am making a 200 amp cs144 alternator this week to power it.

U got any of the competition series wire that is all copper?