audioaddiction863

Installer Institute in holly hill fl is an awsome school. In my opinion it is like the mit of car audio schools. It is well worth the money.

no

Ice House.

try an aperiotic box its kind of like ib but with a few tricks up its sleve

paxton supercharger all the way for your 4.6 at 6 pounds of boost it will be fast enough to get you in real trouble real fast.

or avic z2

360.2 is the best peice going it will take any stock head and make it sound like a very high end unit.

titebond 2 or 3 best glue for mdf ever made imo.

from metra you need part # 71-2003-1 let me know if you need me to order you one.

it was in the last ever produced volume of auto sound and security. they had it in there last issue on the last page.

you have to have it connected for 3-5 sec. disconnected 3-5 sec. and then on. if you shut your car off this process will have to be repeted. or you can purchace a timmer from pac that will do this for you every time you start your car.

78 mercury cougar 2 door

I noticed in your vids that one volt meter always reads 1 volt higher is that an actual voltage drop between the metering points or is one calibrated one volt off? oh yeah great work been following this build for a while. and it turnd out really nice.

Silver solder is about the best solder that I have used but it is expensive. I flowes at a lower temp. and if you are using an iron dont forget to tin the tip. and for faster soldering tin the wire first. also use the correct watt iron for the job.

Upgrade the big three

Have you ever worked on a wankle motor before. They can be kind of tricky. But when thet run right you almost cant stop them.

I thought it would be a 14 year old car with a bangin system

well how would you have put it?

Best thing is to buy from your local car audio shop.

Bosh makes a t shank jugsaw blade just for plexi.

hot glue and popsickle stick pull out dent and reheat with heat gun.

Well I just completed this years RTTI training today. It was very informative and well worth the 4 1/2 hour drive up. I met Mike Eckley of Lineage Motorsports A good friend of steve). I now have some awsome ideas for my eclipse that I am going to build to compete at SBN in Daytona.

Thanks all.

I know that some motors do better on certin grades of oil because of the tollerences in the oil pump. And iI checed the oil cap it says to see the owners manual.

I just bought one and there is no owners manual and I need to know what weight oil to use any help would be great thanks