idbl_fanatic

Those look a lot like Ground Zero Nukes

I had the same thing happen in my Tahoe, and I put some foam all around the head unit, and made sure that it was as secure as it could be, and it stopped.

Get some 2.2 Mf non polarized capacitors, and put on inline with the + going each of your tweeters

Just talked to Mike, he was released today, and is staying in a hotel, they will be flying back home on Thursday.

I talked with Mike on the way home from work today, and he said that he was feeling much better, and that they were going to release him tomorrow or Wednesday.

I didn't know where else to put this. For thos that know Mike, he was doing a show in Hobbs, NM yesterday and suffered a heart attack, he was taken to Lubbock Tx and is now doing ok, I spoke with his wife today, and she said that it was a blockage in an artery and that he was in pain but everything looks to be ok at this point..

Got one of these left.

I have 2 Audiobahn A1800DT for sale, $125 each plus shipping, or if you want to meet locally (Stockton/Sac area) I used these for comps for a while, then I switched out to the 4K's 6 of these amps got me to a 157dB # 3600 watts x 1 MAX @ 1 ohm mono # 1800 watts x 1 RMS @ 1 ohm mono # 2400 watts x 1 MAX @ 2 ohms mono # 1200 watts x 1 RMS @ 2 ohms mono # 1200 watts x 1 MAX @ 4 ohms mono # 600 watts x 1 RMS @ 4 ohms mono # Class D Circuitry # Multi Stranded Power Supply Toroids # Double Sided Glass Epoxy Circuit Board # THD: 0.05% # S/N Ratio: >100dB # Frequency Response: 10Hz - 40KHz (± 1dB) # Variable 18dB Low-pass Crossover: 50Hz - 250Hz # Variable Bass Boost: 0 - 18dB # Variable Bass Boost Frequency: 40Hz - 100Hz # Subsonic Filter: 20Hz to 50Hz # Variable Phase Control: 0° - 180° # Large Display Volt Meter with Blue Illumination # RCA Throughput Connections # 4-way Protection Circuitry: Thermal, Short Circuit, Overload & DC Offset # Dual Cooling Fans # Cobalt Blue Illumination # Chrome Flame Fan Grille # High Gloss Chrome Plated Finish # Dimensions (H x W x D): 2.5" x 12" x 16 11/16"

Oh crap..................... Popeye, looney toons, flintstones, woody woodpecker, underdog, mighty mouse, tom and jerry (which my daughter LOVES) chilly willy, jetson's

She is only 4, and she is 48" tall

How much?

LOL, it's not for me......................me daughter wants one, every since we rode a quad up at my cousin's house, she wants her own, I figured, this would be the perfect size for her.

Hey all, looking for a pocket quad in norther Cali, anyone know where I can get one at somewhat a good price??

So I was the best man at my cousin's wedding, and we went to pick up the Tux last Thursday, so we met him, and the bride at the rental place, when I saw the tux, the vest was PURPLE!!!! I told her that just for making me wear purple, I was going to embarrass her at the wedding. sooooooooooo........ We are all sitting around Friday night at a BBQ, and I said that I should get some purple boots to match the vest, and wear them in the wedding, my cousin, being the person that he is, says "HEY I have some old boots, you could paint!" and his mother says "I have the paint that matches pretty close", soooooooooooI was like, "BRING ME THAT SH**"...............so, without further ado

SSSHHHHHHHHHHHHHHHHHHHHHHHHHHHH Although that does look like something I would have done back in the day.

I was watching the news this morning, and I see this headline "1 Dead, 7 Injured In SUV Rollover Off I-5" and they show a picture of a black Excursion that had rolled, my first thought was it was Bill (KingSUV) and Mel, thankfully it wasn't F'n news!! http://cbs13.com/topstories/local_story_219072655.html

Ya know, it's funny, cause I don't even notice the weight loss until I either have to buy new pants, or someone shows me a pic like this, thanks Steve LOL, I took those pics, and made a side by side, here ya go:

OH DAMN!!!!!!!!!!!!!!!!!!!!!! Here is a more recent pic...........

Oh, and just so you all know, I was 34 yrs old when I had the stroke Thanks all for the kind words, yeah it has been tough, but like i said, it was a REAL eye opener, and I plan on staying around for a LONG time, so I am DEFFINATLY sticking with this!! and I WILL get the the weight he wants me at

As most of of you know, or may not know, I suffered a stroke in Feb, this is the National Stroke Association Logo I had a blood clot on the left side on my brain. Dr's say it was most likely caused from my diabetes not being under control for so long, and my veins and arteries getting weak, over weight, high blood pressure, high cholesterol. Needless to say, EVERYTHING has changed now, this was a REAL wake up call for me, scare the HOLY SH** out of me, I have lost 79 lbs, still have 36 to go, to be where the Dr wants me, all my blood work is "normal" now, so I am doing as good as I can, the only side effects that I have, is that I occasionally studder, and I now suffer from seizures, but I am on meds to keep those under control, and so far they seem to be working. It turned out really good, here is the actual logo: Here is the the Tattoo, on my upper right arm:

SWEET!!!!

Yes

Ok, I have been working on this problem for a week, and could not figure it out. I just upgraded to Vista on my laptop, and I could connect to all my other PC's (XP) on my network by going \\computername or IP address, but could not see them under "network" they would show up under "network map" but not just "network" thus I could not map a printer. I could only "see" my laptop, and the router under "network" but no other PC's I just happened to connect to my mothers wireless network last night, and low and behold, all her computers (XP) showed up under network. So I figured, what the heck, let me try to map the printer, WOW, it mapped, and I could print. So I started looking at settings, all the setting were identical as far as network (on the XP PC's), so on to the router settings, compared setting to setting to mine, everything was the same, other than, she had firmware 4.30.5, and I had version 4.30.9. I could not find version 4.30.5, but did find 4.30.7 so I installed this version, as soon as I did, low and behold, there was all my PC's!! This was a Linksys WRT54GL

I tried a print server, and couldn't get ANY PC's to connect to it. I think I may have found my problem, on the Vista system, Under client for MS networks, I CANNOT get it to keep "Windows Locator" for the RPC service. I change it, and it goes right back to being blank when I go back in there.