Jump to content

sierra mist

Members
 View Profile  See their activity

  • Posts

    818

  • Joined

  • Last visited

 Content Type 

Everything posted by sierra mist

  1. sierra mist
    And I'll think about the MA 18
  2. sierra mist
    I was exploring the option of 3 10" Dayton Titanic MKIII subs. They are SVC 4 ohm subs. That would give me a load of 1.34 ohms.
  3. sierra mist
    I understand now. I would need 2 subs (each at 1 ohm) correct?
  4. sierra mist
    I was going off this link http://www.rockfordfosgate.com/scripts/r...ated=1115933221
  5. sierra mist
    I received an email talkin' bout they would be out until the 27th.
  6. sierra mist
    What kinda power would I expect out of a 1.34 ohm load? Moreover, does the lower the ohm load mean the power is less *clean*?
  7. sierra mist
    I know a lot of folk dog Sony. Lemme tell ya, I was in a pinch and need an amp. My cousin let me use this for a few week. I had it pushing 2 12" HE2's in a 4.00 ft^3 box tuned at 35hz. It never went into protect. It worked great. I will never bash Sony amps again. Maybe it had something to do with the box I built
  8. sierra mist
    Is it going to be the same amp?
  9. sierra mist
    Post pics when you finish
  10. sierra mist
    Planning installs....watchin' movies......working?
  11. sierra mist
    Goodie Mob - Still Standin' UGk - Ridin' Dirty 2 Pac - Me Against the World
  12. sierra mist
    Did you scrape the paint up?
  13. sierra mist
    Is there a way to determine how many panels I can get out of one sheet of MDF? Something that would show me, I can make 4 20" x 40" panels. Basically, I want to maximize the amount of MDF I have without wasting it. Instead of cutting to down, I could cut across. I hope i explained that well enough.
  14. sierra mist
    What amps are you going with?
  15. sierra mist
    The last few times I waxed I used Meguiars cleaner wax and got good results. I would like to try some of this.
  16. sierra mist
    x2. I get my microfiber towels at Sam's Club. You can 25 for $11.40 something.
  17. sierra mist
    How long did it take you to construct the box?
  18. sierra mist
    Eventually, I probably won't have time to get around to that. I'm starting the install from scratch.
  19. sierra mist
    My cousin works for them. I'm a day late and a dollar short. Oh well, I'll post pics of my install on Wednesday.
  20. sierra mist
    My truck requires a GMOS-LAN-01 and it's $130. Sonic don't carry it...already asked. Even if they did, it wouldn't be 50% off with the purchase of a deck.
  21. sierra mist
    There are several models on ebay. After the price of the unit and shipping, might as well pay a few more dollars and get the harness for $65. You probably remember my HU scenario thread.
  22. sierra mist
    Yeah, Crutchfield had a databus I needed for 50% with the purchase of a deck $129 or more. It will act as the brain to my AVX-P7300DVD.
  23. sierra mist
    Ok, I would normally cut off the factory one and slap on a new one. Kinda don't wanna do that with this vehicle.
  24. sierra mist
    I don't want to replace the battery post with an aftermarket connector. Should I just use a ring terminal to fit the gauge wire I am using? Might seem like a noob question but I have replaced the battery post in my previous installs.
  25. sierra mist
    Just order my Pioneer DEH-P5900IB HU from Crutchfield!
×
×
  • Create New...