08tahoe

np hope u liked it also

no problem

here is some new lil wayne that i liked. http://www.youtube.com/watch?v=bR8veIe7SOU http://www.youtube.com/watch?v=EBzQHf_iy-E

maybe you can have kmart lost prevention check the surveillance tape to the parking lot, and you could probably find something out

my powerbass asa1500.1d is a badass amp!! i dont like rf at all

What he said ^^^

i want to have a system like that one day

Congratulations!

can you drive to my house and set my gains with it instead of whacking me in the head with it

damn that looks clean! Thanks man! The sub is where my backseats used to be. Ill have to find my camcorder and get a video on here ill be posted for that

if you set your gains correctly youll be fine cause those subs are 400 watts rms each and by wiring them at 1 ohm you will be giving each of them 300 rms each. cause going by the specs i found your amp is 600 watts x1 @ 1 ohm. so that should be enough power.

damn that looks clean!

what size wire do you recommend so i don't burn my stuff down you should be good with 4 gauge wire for power and ground and from amp to speakers 12guage should be good

all i no about my wiring right now is that theres two wires going in the box going to both of my subs but both subs have two wires connecting them ok, take your subs out of your box, or if you can somehow see the wires without taking the subs out then make sure you have your subs wired in parallel.. witch is how we showed you the wiring link, witch was wiring option 1. positive to positive on each sub and negative to negative on each sub and then get one positive from each sub and one negative from each sub and wire those in parallel to the amp ok ill have to try this in the morning cause its almost 2 in the morning here ohhh and the subs i have right now dont have the four ports for the wires so does that mean i have to get more wires your sub should have the 4 ports, 2 on one side and 2 on the other. this is your sub right?

ok let me know if you need anymore help

Ok and thanks for all your all your help and can you tell me how i should wire it with my amp just in case no problem.. wire it like this My link

all i no about my wiring right now is that theres two wires going in the box going to both of my subs but both subs have two wires connecting them ok, take your subs out of your box, or if you can somehow see the wires without taking the subs out then make sure you have your subs wired in parallel.. witch is how we showed you the wiring link, witch was wiring option 1. positive to positive on each sub and negative to negative on each sub and then get one positive from each sub and one negative from each sub and wire those in parallel to the amp

i found this info on your amp.. so that should be good with the subs you got 1. Product: Crossfire VR600D Mono Power Amplifier 2. Specs: Mono Class D Power Amplifier 150 x 1 @4ohms at 0.08% THD 300 x 1 @2ohms at 0.4% THD 600 x 1 @1ohm Rated at 12.5V Signal to Noise Ratio >90dB Variable LP X-Over 50 - 250Hz Subsonic Filter

anyone else know anything about his amp, that would care to help?

if you wire it in series you wouldnt get enough power for those subs with your amp. but in the review the person sais their running theirs at 1 ohm and it was rated at 897 watts at 14.4 volts so if you go by that then your amp would be good for those subs.

ya i saw that info also on your amp but i cant really find any place that sais its 1 ohm stable so just to be safe i wouldnt wire those subs to your amp like i told you to (in parallel).

how to i wire them like you said? will i be able to use the switch im using right now with this amp switch??? I have a switch running from my amp to a switch so i can turn my amp off. Didn't hook it up to my radio yet. yup you will be able to use that with this amp ok thanks and last question do you know how big the amp is cause i cant find the measurements ohhh also i have a 600 watt amp Crossfire Vr600D Class-D Mono amp with that push the subs with the wiring you showed me Dimensions of amp 10.00"(L)x9.27"(W)x2.35"(H).. do you know if your amp is 1 ohm stable? and how many watts rms does it put out at 1 ohm if it is?

how to i wire them like you said? will i be able to use the switch im using right now with this amp switch??? I have a switch running from my amp to a switch so i can turn my amp off. Didn't hook it up to my radio yet. yup you will be able to use that with this amp

how to i wire them like you said? will i be able to use the switch im using right now with this amp switch???

how to i wire them like you said? match all postives and put on postive on amp and match and negatives and put on amp negative edit: go here http://www.rockfordfosgate.com/rftech/woofer_wizard.asp?submitted=true&woofer_qty=2&woofer_imp=4 use wiring option 1 on this link ^^^