KenC210

Really... Its not the system that wins, it's the hard work that did it... Just saying Edit: congrats to the winners... Also nice alt hunters

If you don't have a roller you could use the back end of a screw driver to apply some pressure to the deadener. That's what i used, a craftsman screw driver has a round end on the back an worked fine edit: http://toolmonger.com/wp-content/uploads/2007/12/DM_Sear5screwdrivers.jpg

Alright so after the holidays from visiting family and great things. It was about time for me to continue with my build. Well i was going to start with the sub box with previous specs, however when i want to double check my measurements to see if they will fit. Well it comes to the fact i only have 40.5 max width and that is an extremely tight fit. So i decided to get in torres and try a new box. Well this is what i came up with. What do you guys think of the specs? Does everything seem ok before i start the box?

happy new years to all... The liquor is to be poured first by the way... enjoy the jack

Thank you that is a good video... Seems like i will be getting on the cc-1 sometime next month

Bump... Just wondering before i buy a tool that will not work with how i am trying to use it.

So i have an AQ120.4 and would like to set crossover points in specific ranges. Would i be able to do it with this tool? What i plan on is setting ranges for Mid bass, mid range, and tweeters. I have looked at the manual for the cc-1 but i dont think there was anything about setting cross over points for band pass.

A few clips you gotta check out. Just let them hate though. Katt Williams-haters Pimp Chronicles v This here in reply to the hate v edit: Also got to admit i didn't know much about car audio till i was introduced to this site. Only messed with car audio in high school and a buddy at work old me about the guy steve meade and to look him up on you tube i got inspired.

Thought this was funny also... But anyway I think there is less resistance from a larger wire so you can get more charge faster.

this couldn't have com at a better time... Im looking at getting some video equipment in my ride.

Here is the new torres... I kinda like it better how does it look?

Thank you for the support... Just curious about dropping the box size a half cube, what are the benefits or disadvantages of doing so? You say due to the power im running, 2 AQ2200D strapped, that it would be a good idea just wondering why.

Alright thank you. The site says ideal at 3.5cuft for 1 15" ported so i figured around 7cuft should do.

Alright i adjusted the box a little. I tried playing around with the port and i think i got it or maybe not, what you guys think?

yes this is for a daily. So i should try and change the tuning and shoot for a smaller port area per cuft edit: so the port area @118 is good or should i change things around to get 13-14in2 per ft3?

Oh sorry its for a pair of 15's

Just looking for some input on this box build. Just wondering if the box is right for these subs. I will be powering them with 2 AQ2200D's Edit: Post #21, page 2 with new edited specs.

SUBS: 2 XL 15's Also 2 LVL 4 15's 78065

Im sure it comes in others also but specifically from toyota

Its a factory sheet they put in the fully equipped vehicles

If i had to guess its rubberized asphalt but i am sending a few pieces to jon tomorrow and what info he gives me i will post it unless he has posted it here already

I have these vibration damp pieces that i get for free. I would like to send you a sample to get your input. It seems you have done your homework on a lot of the other brands and have the best educated opinions. If its not to much trouble i would like your opinion. Some pics of the damp

I dropped them an email i will find out either way edit: I know i been looking around and i seem to see most pro audio is individually priced, but i was sure in this cause because i seen some as a pair also. Like the AQ pro audio is sold as pair. I was thinking about getting them but i have no idea when they will be available again