cj92

Assassins Creed IV: Black Flag Cj92 Batman: Arkham Origins Cj92 Splinter Cell: Blacklist Cj92

coke and vodka ....

http://www.knukonceptz.com/productDetail.cfm?prodID=KNO-RC52 kno knoise sound deadener?

What's up smd I have some 80mil kno noise what I'm wanting to do is put this on the floor and spray spectrum on top of it to use it as a decoupler for luxury liner,will that work?

I was thinking somewhere around there.

whats going on i recently got an 05 mustang and was wanting to do some sound deadening on it right now mainly the floor back seat area and as far under the dash as i can. i was curious as to how raam mat bxt stack up to second skin, it's a good product just curious comparison wise and also how many sq ft would i need to do full coverage on the ares I'm wanting? Thanks

web site http://www.sherco-auto.com/ballistic.htm

this is the specs I found online for Ballistics he SSBK bulk kit contains 9 18" x 32" pieces Total Coverage: 36 sq ft. $179.95 SPECIFICATIONS Appearance: Black Butyl Based Material With 4 Mil Aluminum Constraining Layer, With Craft Paper Release Liner THICKNESS: NOMINAL Thicker than the competition 0.083” (2.1MM) MASS: GREATER THAN 0.73LBS./SQFT (2.55kg/M2) TEMPERATURE RANGE: OPTIMAL PERFORMANCE 14°F TO 140°F (-10°C TO +60°C) ADHESIVE PEEL STRENgTH: MINIMUM 43 LB./IN. (75 N/CM) ON COLD STEEL CHEMICAL RESISTANCE: RESISTANT TO WATER AND MINERAL OILS FEDERAL STANDARDS TESTS: MEETS: FMVSS 302

My dad was wanting to but some sound deadener in his 06 nissan titan, We were discussing it and I was telling him he should go with something like second skin, or to save some money put something like Raam mat, stinger or something of that matter in the truck but he was calling around town and found a local shop that sells BALLISTIC SOUND DEADENEner I have never hear of it but the shop selling it of course stand behind it, it is supposed to be 2.1mm thick anyone know anything about this

I know this is old but how do u like the mb's and do you have any finished products pics

Looks good i like the pods in the backseat their pretty clean all in all it looks good you should post some more pics of the car when you can , also i guess its some kind of secret on here but i was going to start a build log and cant figure out how to post pictures, so how is it done their all on photobucket but from there I'm lost thanks.

I just order 30sq ft of b stock form second skin and the quality is awesome the only that i noticed was wrong with my is it had some extra foil, this was my first time using SS and ill be using them again 30sq feet was enough to do 100% coverage on my roof and behind my dash and still several sheets left, but for a budget you could use raam mat its comparable to regular damplifer i used it and its a pretty good dampener for the price also i would recommend the PS Ensolite makes a difference on top of the raam mat. Also customer service is good he can tell you how much you need. http://www.raamaudio.com/categories/Mat-and-Foam-Products

I have a 92 Dodge d150 single cab I have 2 layers of raammat on the floor and back wall with a layer of ensolite over all of it

Ok thanks jon, If said i was applying it to the hood i didn't mean to lol, what do you think would better in my situation LL or LLP, i was also think just for overkill purposes adding one of those underneath the dash when i install it. How much B-stock Pro and Either LL or LLP do i need

Ok so this is my project its my DD but eventually it'll be a show truck, I already talked to Jon a little about this but i need more help and I'm hoping he'll also chime in again. Here is what i have so far two layers of raam mat BXT II on floor and back-wall with a Layer of PS Ensolite now this did a good job for the price but not quite what i wanted so im going to second skin. I have my dash pulled along with the headliner and trim what i was thinking it getting some B-stock Pro enough to cover roof as much of the firewall as possible, then covering the entire inside with LL or LLPm then taking the rest of my mat and putting it on the underside of the truck with spectrum or bed-liner and also putting mat on the firewall under the hood . what do you guys think, let me know if you have any better ideas. Thanks

ok and i checked out your build thread looks good can't wait for more updates. Should have updates this weekend. My super tweets will be here today and my crossover is supposed to be here Saturday and those are what is holding everything up. Cool man .. i manged to score both those subs for 180, I also have an 800 watt memphis mono block amp will this be good for those or will it overpower them ? Thanks

ok and i checked out your build thread looks good can't wait for more updates.

ok thanks so is $250 for 2 brand new a good price still in original box

So can these get loud and be clean also

I guess i should have put this in the OP but im looking for clean bass but something that can get loud when i want them to, Thanks for all the quick responses

I'm new here and not quite sure if this goes here but i found 2 memphis 15-mr10s4 for sale brand new in the box the want $250 is this a good price are these even good subs i want to put them in a single cab dodge pick up. Need to know something pretty quick thanks.