WWYD: gain/voltage dillema (POLL)

[adreano17]

i have an old RF amp 4 channel, so both the channels are not identical. 1 is high, one is low output. i semi fixed the problem by changing balance on HU to match as best as i can. the difference between the channels is only 1 volt or 4 RMS. idk whether to overpower one speaker, and underpower the second. or make one perfect, and overpower the 2nd by more. the first option evens out the distance. i dont think 4 RMS is too big of a difference to do damage to anything, i just need a second opinion. and how much more can these type S take. info in sig. thanks. take part in the poll as well. help me out

p.s. the 6.5s are rated for 80RMS, 6x9s 85RMS

[adreano17]

bump

[BanginOnABudget]

if you want to down the voltage of one rca, just get one of those remote level controlers.

http://www.sonicelectronix.com/item_10092_Scosche-RLC.html

but i recomend getting another amp. i dont understand how the channels are different voltages unless you have your gains messed up....

how is one high and one low? i dont understand, what model amp is it?

oh, and if your speakers are eighty watts (collective) your channels should be putting out 17.9v maximum per speaker.

[adreano17]

i will look into that. but its old, and the previous owner probably let it see low voltage. its a good amp overall though.