anthonyott99 Posted February 25, 2011 Report Share Posted February 25, 2011 After my A-pillars are finished in the next 2 to 3 weeks i am going to switch these subs over from mids to straight Low pass bass , and i was wondering if anybody though that these enclosures would work as ported if i added a small 1 or 2 inch port to them ? or do you think they are too small ?? Link to comment Share on other sites More sharing options...
bumonskateboard6 Posted February 25, 2011 Report Share Posted February 25, 2011 Way to small to put a port in, you wouldn't have any good port area with a 1" or 2" port Current Systems: 2011 BMW 335i Hertz HDP1 DC LVL3 12" Full Carbon Fiber 2002 Acura TlKenwood DNX9980HD2 DCLVL4 12" Subs with LVL5 Parts D.7 CoilsDC 3.5kHertz HSK-165 up front HCX-165 RearHertz HDP4 AmpDC Power Engineering 260 Amp AltBig 3 and amp powered with KNU 1/0XS Power D2400 Up Front i pulled out my dick in class many of times and had it shown. get over it bitch...stupid open legged hairy beavered bitch... going over rms = smaller box, under rms = bigger box... Low voltage doesn't blow amps. That's a myth. A router that does the sub holes makes rounded edges also? Link to comment Share on other sites More sharing options...
anthonyott99 Posted February 26, 2011 Author Report Share Posted February 26, 2011 Even with it just bein an 8 ? Yeah , i might just stick with sealed , dont want to ruin my pods that i took so much time on and it not sound right ! Link to comment Share on other sites More sharing options...
Torres Posted February 26, 2011 Report Share Posted February 26, 2011 keep it sealed if you're going to do it Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.