jrot Posted June 29, 2011 Author Report Posted June 29, 2011 yeah im building an amp rack and im hoping to hide the battery under it if i have room...if not i might mount one amp high and one low cause im gonna build a back peice too i think so ill have to see what happens once this is happening in wood....im also trying to decide on a few details to like am i going to flush mount the amps or not...im nervous to flush the 5ch cause its a class A and runs hot it seems so if i do flush it then ill have to leave it open on bottom or something...so kinda designing as i go i guess.
BJD3 Posted July 8, 2011 Report Posted July 8, 2011 I checked out the car, and there is a point under the hood where you connect and I guess that runs to the rear battery. This should be able to serve your purpose. http://www.jegs.com/i/JEGS-Performance-Products/555/10315K/10002/-1 Anti Peel and Seal...lol You may be offended by the above. Don't take it personally, I'm just abrasive. 2002 Buick Park Avenue DC Level 4 M2 12 D2 Car Audio Bargain 1600.1 Eclipse CD3200 ~2 cubes @ 34 hz. Stinger Roadkill Expert
jrot Posted July 10, 2011 Author Report Posted July 10, 2011 I checked out the car, and there is a point under the hood where you connect and I guess that runs to the rear battery. This should be able to serve your purpose. http://www.jegs.com/i/JEGS-Performance-Products/555/10315K/10002/-1 that is perfect sir, thank you, exactly what i was looking for....
jrot Posted July 10, 2011 Author Report Posted July 10, 2011 ok so for the few of you that are keeping and eye on this...i got about as far with real wood as i did with card board before the heat kicked my from the outside into the house...but anyway here are a few very rough test fit pics...im hoping that it will cool off early enough for me to use a touch of light to get at least a bit of the bracing done. if i can do that then i should be able to move to the basement for finishing work....anyway here you go...maybe it will make more sense to a few now.... it wont be any where as tight as contoured as i want but i think this will work for now, my real downfall is tooling...when i pic up a few more wood working tools and a touch of experience this can get better....
jrot Posted July 10, 2011 Author Report Posted July 10, 2011 lookin pretty good man...tuned in thank you sir. when i get better tools ill have to do it all again. haha so it goes i suppose...im ready to do some more on it, might just have to brave the heat.
BJD3 Posted July 10, 2011 Report Posted July 10, 2011 I think you realize by now I'm watching this thread. lol I wish I had a coupe/two door hatch so I could kill the back seats and fashion an amp rack. If you carpet the floor, it may fill in enough to look like it more closely hugs the floor/side panels. Anti Peel and Seal...lol You may be offended by the above. Don't take it personally, I'm just abrasive. 2002 Buick Park Avenue DC Level 4 M2 12 D2 Car Audio Bargain 1600.1 Eclipse CD3200 ~2 cubes @ 34 hz. Stinger Roadkill Expert
pstone11 Posted July 10, 2011 Report Posted July 10, 2011 That is looking good man! ^^^ he has it right with the carpet idea if you can find the right color Check out StoneSounds to see my recent builds.Or look at the Flying White Facebook Page!
BassJunkie Posted July 10, 2011 Report Posted July 10, 2011 Sick supra! Keep up the good work 1986 C20 Suburban 9 American Bass XFL 15's B2 M1MKII 14v XS Power Batteries Maxwell Caps Acoustical energy is free. Electrical energy is not you havent lived until you've hit a screw with a router.
mungface78 Posted July 10, 2011 Report Posted July 10, 2011 Nice job on your audio build! Clean mk3! I had one just like that, make sure you torque down the head bolts real good..
Recommended Posts
Archived
This topic is now archived and is closed to further replies.